| Author |
Message |
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
 Re: Make Your Own ....2CV.... 4x4 Progress a bit slow at the moment. To allow the rear prop a clear run, had to chop the rear axle tube into two parts and use extra saddles for support plus extra bits (weight) to the chassis. As it was apart used some chassis black to cover up the my welds. Attachment:
P1010002.jpg [ 74.82 KiB | Viewed 6549 times ]
|
| March 29th, 2012, 3:25 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Prop Shafts After a lot searching/phoning have the parts for the props. Attachment:
DSC00190.jpg [ 52.71 KiB | Viewed 6516 times ]
No comes the hard part fabrication,
|
| April 12th, 2012, 2:58 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Rear Prop made and fitted. Attachment:
DSC00213.jpg [ 75.19 KiB | Viewed 6488 times ]
|
| April 16th, 2012, 4:58 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Middle Prop. Attachment:
DSC00215.jpg [ 69.49 KiB | Viewed 6461 times ]
Calipers and Hand Brake Attachment:
DSC00216.jpg [ 83.7 KiB | Viewed 6461 times ]
Help or Hinder Attachment:
DSC00218.jpg [ 71.98 KiB | Viewed 6461 times ]
Top Prop. Needs the inner yoke turned down to fit the tube with a visit to my machinist man. Attachment:
DSC00219.jpg [ 38.73 KiB | Viewed 6461 times ]
|
| April 17th, 2012, 2:49 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Rear Brakes. Fitted Discs + Adapters + Calipers + Pads. Havent got any retaining pins or springs. Used some studding for the Pad retaining pins, do I need the springs?? Attachment:
DSC00220.jpg [ 71.48 KiB | Viewed 6434 times ]
|
| April 18th, 2012, 3:56 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 The non Citroen parts of the project, the transfer box. Before Attachment:
IMG_1343.jpg [ 82.39 KiB | Viewed 6408 times ]
Some Cleaning.. Attachment:
DSC00044.jpg [ 72.64 KiB | Viewed 6408 times ]
In bits Replace seals and check the bearings and work out some way to lubricate the top bearings. @brammie can't help noticing that you placed the T-case in an upright position! you know the oil won't come up to your upper barings this way? Attachment:
DSC00221.jpg [ 66.43 KiB | Viewed 6408 times ]
|
| April 21st, 2012, 2:36 pm |
|
|
|
ken
Agony Aunt - You have a car problem? Speak to Ken
Joined: March 6th, 2009, 1:40 am
Posts: 3675
|
Re: Make Your Own ....2CV.... 4x4 Depends if you'll be bothered by some squeaking from the pads if they move into light contact with the discs, due to the vibration as you yomp across the scenery...  subarupete wrote: Rear Brakes. Fitted Discs + Adapters + Calipers + Pads. Havent got any retaining pins or springs. Used some studding for the Pad retaining pins, do I need the springs??
_________________
|
| April 21st, 2012, 3:19 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Thanks Ken, Got the calipers (NOS) on ebay some time ago £15  . Will see how long I can put up with the squeaks?
|
| April 21st, 2012, 3:52 pm |
|
|
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm
Posts: 2847
Location: NL
|
Re: Make Your Own ....2CV.... 4x4 subarupete wrote: The non Citroen parts of the project, the transfer box.
Barbour chassis? susi prop shafts? diy gearbox endcaps? 1-2-spark ignition????????  do I need to continue
_________________
Russell wrote: Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ
|
| April 21st, 2012, 4:13 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 OK, OK  go the message, but the "spirit" is still citroen.
|
| April 21st, 2012, 5:35 pm |
|
|
