View unanswered posts | View active topics It is currently November 25th, 2020, 4:34 am



Reply to topic  [ 163 posts ]  Go to page Previous  1 ... 13, 14, 15, 16, 17  Next
 We have liftoff.....AZU 250 rebuild thread 
Author Message
Firing on two.
User avatar

Joined: March 21st, 2013, 12:04 am
Posts: 1124
Location: Exeter, Devon
Post Re: We have liftoff.....AZU 250 rebuild thread
Check you have 12v at the actual head/side lights. If you have, then it must be a ground issue.

_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....


October 7th, 2020, 3:00 pm
Profile
Firing on two.

Joined: May 23rd, 2011, 7:14 pm
Posts: 277
Location: ecosse
Post Re: We have liftoff.....AZU 250 rebuild thread
will check tonight......but odd that horn is still working :?


October 7th, 2020, 4:36 pm
Profile
Firing on two.
User avatar

Joined: March 5th, 2009, 6:23 pm
Posts: 1940
Location: Near Monmouth
Post Re: We have liftoff.....AZU 250 rebuild thread
Horn is earthed via fixing nut?


October 7th, 2020, 4:48 pm
Profile
Firing on two.

Joined: May 23rd, 2011, 7:14 pm
Posts: 277
Location: ecosse
Post Re: We have liftoff.....AZU 250 rebuild thread
Just been back out to garage.......All sorted happy days :)

Battery tray was out for access to back of speedo. to get it out I had loosened the vent....which also included the earth.....EEJIT !

Image


October 7th, 2020, 10:20 pm
Profile
Firing on two.
User avatar

Joined: July 10th, 2010, 12:35 pm
Posts: 955
Location: Magyar
Post Re: We have liftoff.....AZU 250 rebuild thread
:idea:

_________________
'T is een kwestie van geduld.........


Ez a türelem kérdése.........


October 8th, 2020, 7:34 am
Profile
Firing on two.

Joined: May 23rd, 2011, 7:14 pm
Posts: 277
Location: ecosse
Post Re: We have liftoff.....AZU 250 rebuild thread
Been a while !

dash all back in an nearly finished wiring.......Got my steering wheel cap done today.

Started with a rough cut from some scrap 10mm plate.

Image

Tickle with the grinder and add something for lathe mounting

Image

My mates dad then added a step to fit boss using his 60yr old churchhill lathe. Then then I mounted in my drill, and added some shape with a 40grit flapwheel in the grinder...

Image
Image
Image


November 7th, 2020, 8:07 pm
Profile
Firing on two.
User avatar

Joined: March 5th, 2009, 6:23 pm
Posts: 1940
Location: Near Monmouth
Post Re: We have liftoff.....AZU 250 rebuild thread
Good results, like it.


November 7th, 2020, 8:22 pm
Profile
Firing on two.
User avatar

Joined: July 10th, 2010, 12:35 pm
Posts: 955
Location: Magyar
Post Re: We have liftoff.....AZU 250 rebuild thread
:) nice

_________________
'T is een kwestie van geduld.........


Ez a türelem kérdése.........


November 8th, 2020, 9:34 am
Profile
Firing on two.

Joined: May 23rd, 2011, 7:14 pm
Posts: 277
Location: ecosse
Post Non stopping wipers !
Hi folks, got caught in the rain today, wipers started fine, but.......even without switch, they wouldnt stop......

I swapped the dash recently, so assumed I'd got the switch wiring wrong , so I disconnected it,,,,,and they still wiped !

Found a few threads on here but I'm still unclear what i need to do !! Is there an easy guide ??????

(its the older, cheese grater type....)

Cheers !

Gerry


November 21st, 2020, 11:12 pm
Profile
Firing on two.
User avatar

Joined: March 21st, 2013, 12:04 am
Posts: 1124
Location: Exeter, Devon
Post Re: We have liftoff.....AZU 250 rebuild thread
Is it one that parks? Or would you expect it to just stop where ever you turned it off?

_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....


November 21st, 2020, 11:52 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 163 posts ]  Go to page Previous  1 ... 13, 14, 15, 16, 17  Next

Who is online

Users browsing this forum: No registered users and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.