| Author |
Message |
|
Rhythm Thief
Firing on two.
Joined: March 10th, 2010, 12:37 am
Posts: 1927
Location: Alone in my polytunnel with my pitiful competition onions
|
 Re: my kingpin came out a bit ayjay wrote: ive found another arm with hub and good-ish kingpin, ill replace the knackered arm  You'll be in trouble when Viking finds out ...
_________________
The best things in life aren't things.
|
| October 5th, 2012, 7:11 pm |
|
|
|
ayjay
Firing on two.
Joined: April 27th, 2012, 6:48 pm
Posts: 709
|
Re: my kingpin came out a bit i think its the better way out of the problem rythem theif  i went to the shops today blood- heck, the whole body/steering wheel shook at about 35mph  the eye in the arm must be really knackered i,ll post tomorrow
|
| October 5th, 2012, 11:09 pm |
|
|
|
2CViking
viking bastard
Joined: April 18th, 2009, 11:43 am
Posts: 2424
Location: Meneac, Bretagne France
|
Re: my kingpin came out a bit Rhythm Thief wrote: ayjay wrote: ive found another arm with hub and good-ish kingpin, ill replace the knackered arm You'll be in trouble when Viking finds out ... If I lived nearby, I would come around and hit your head with real fucked arm  Why on earth reject a healthy arm when an oversized pin can fix the problem.
_________________
|
| October 6th, 2012, 12:54 pm |
|
|
|
ayjay
Firing on two.
Joined: April 27th, 2012, 6:48 pm
Posts: 709
|
Re: my kingpin came out a bit 2CViking wrote: Rhythm Thief wrote: ayjay wrote: ive found another arm with hub and good-ish kingpin, ill replace the knackered arm You'll be in trouble when Viking finds out ... If I lived nearby, I would come around and hit your head with real fucked arm Why on earth reject a healthy arm when an oversized pin can fix the problem. i,ll change the arm then i,ll order an oversized k/p and repair the old arm do you supply o/size pins ?
|
| October 6th, 2012, 1:07 pm |
|
|
|
2CViking
viking bastard
Joined: April 18th, 2009, 11:43 am
Posts: 2424
Location: Meneac, Bretagne France
|
Re: my kingpin came out a bit You can get 17.1 or 17.2 mm. How loose is the original pin? Can you push the pin through without too much force. If the pin slides through without any force, you need 17.2 mm. Best is to measure the hole with a plug gauge.
Most pins I fit are 17.1 mm
_________________
|
| October 6th, 2012, 1:15 pm |
|
|
|
ayjay
Firing on two.
Joined: April 27th, 2012, 6:48 pm
Posts: 709
|
Re: my kingpin came out a bit cheers 2cv viking , i,ll check the pin/eye, in the old arm tomorrow, ive replaced the arm today, no probs at all(the replacement arm is complete with a good k/pin)
|
| October 6th, 2012, 6:55 pm |
|
|
