| Author |
Message |
|
J-dub
Aircooled Idiot
Joined: April 24th, 2010, 10:01 am
Posts: 5733
Location: Location Location
|
 Replacing sound proofing Anyone done this succesfully?
Id like to replace the horrible brittle soundproofing above the shelf in the front on the bulkhead. As well as below but cant seem to find it on any suppliers websites.
_________________
1988 2cv 652cc
1993 Toyota Hilux Surf 3000cc runs on Bio Diesel
2004 Toyota Landcruiser Amazon 4200cc runs on Bio Diesel
1998 Daihatsu Hijet 1300cc
2005 Susuki Bandit 650cc
Last edited by J-dub on March 9th, 2013, 1:27 pm, edited 1 time in total.
|
| March 9th, 2013, 9:02 am |
 
|
|
|
Geert
Firing on two.
Joined: July 10th, 2010, 12:35 pm
Posts: 1160
Location: Magyarország
|
Re: Replacing spund proofing I replaced mine, during the restoration of my van. This is modern stuff, thinner than the old one. It is a very difficult job, to do it properly, and it does not fit very well, I had to cut mine to have a proper fit. Best is to remove the whole dashboard . Ask Peter, 2CViking : http://www.2cviking.eu/catalog/product_ ... cts_id=889
_________________
'T is een kwestie van geduld.........
Ez a türelem kérdése.........
|
| March 9th, 2013, 9:24 am |
|
|
|
dave 411
Firing on two.
Joined: August 19th, 2010, 10:44 pm
Posts: 1815
Location: Cardiff
|
Re: Replacing spund proofing Fuck James,SPUND  ,read through before you press the submit button,and using an i phone is no excuse 
_________________
[img]http://i1207.photobucket.com/albums/bb480/alastairsmith999/dave411-5.png[/im
g]Horizontally Opposed
|
| March 9th, 2013, 9:44 am |
|
|
|
dave 411
Firing on two.
Joined: August 19th, 2010, 10:44 pm
Posts: 1815
Location: Cardiff
|
Re: Replacing spund proofing I made some templates,and bought some good quality soundproofing from somewhere in Cwmbran.Stuck it on with good quality glue,not the spray stuff,thats crap.the put some black carpet over it.Looks good.I have the templates in my garage if you want some.
_________________
[img]http://i1207.photobucket.com/albums/bb480/alastairsmith999/dave411-5.png[/im
g]Horizontally Opposed
|
| March 9th, 2013, 9:47 am |
|
|
|
banjo
Firing on two.
Joined: June 5th, 2009, 9:17 am
Posts: 747
Location: Staffs & France
|
Re: Replacing spund proofing I covered the original stuff with grey Berber type carpet tiles, these were used above the dash,on the parcel shelf and bulk head.I also have thick carpet on the front and rear floors,using the rubbers as templates.This has made the car a lot quieter besides I like the dark red carpet! The boot is floored out and carpeted also....
|
| March 9th, 2013, 12:23 pm |
|
|
|
Russell
Firing on two.
Joined: November 29th, 2008, 10:05 pm
Posts: 9259
Location: West Sussex, U.K.
|
Re: Replacing spund proofing My car is already fully resistant to Spunds.
_________________
samfieldhouse wrote: What I like about I2F is that there is no pretence of democracy.
|
| March 9th, 2013, 1:12 pm |
|
|
|
Harley
Firing on two.
Joined: May 3rd, 2009, 11:40 am
Posts: 816
Location: Melbourne, Australia.
|
Re: Replacing spund proofing Best Spund dedander round http://www.dynamat.com/Karverd kermit frum arshole tu brekfast time wiff it, qwuiet az ah non in cherch. Arley
_________________
samfieldhouse wrote: It is M9 for the shocks yes, the rest I'll check when next i'm underneath her. Ironically, this will be valentines day.
|
| March 9th, 2013, 1:27 pm |
|
|
|
J-dub
Aircooled Idiot
Joined: April 24th, 2010, 10:01 am
Posts: 5733
Location: Location Location
|
Re: Replacing spund proofing Geert wrote: I replaced mine, during the restoration of my van. This is modern stuff, thinner than the old one. It is a very difficult job, to do it properly, and it does not fit very well, I had to cut mine to have a proper fit. Best is to remove the whole dashboard . Ask Peter, 2CViking : http://www.2cviking.eu/catalog/product_ ... cts_id=889Is it worth the hassle? Its not that bad
_________________
1988 2cv 652cc
1993 Toyota Hilux Surf 3000cc runs on Bio Diesel
2004 Toyota Landcruiser Amazon 4200cc runs on Bio Diesel
1998 Daihatsu Hijet 1300cc
2005 Susuki Bandit 650cc
|
| March 9th, 2013, 1:32 pm |
|
|
|
ChrisW
Firing on two.
Joined: February 21st, 2012, 9:01 pm
Posts: 1136
Location: Avranches, Sud Manche, France
|
Re: Replacing sound proofing http://www.woolies-trim.co.uk/c-15-sound-deadening.aspxUsed this firm many times before for different things - great service
|
| March 9th, 2013, 2:06 pm |
|
|
|
Matt_S
Firing on two.
Joined: July 28th, 2010, 11:50 pm
Posts: 590
Location: Northumberland
|
Re: Replacing spund proofing Harley wrote: Best Spund dedander round http://www.dynamat.com/Karverd kermit frum arshole tu brekfast time wiff it, qwuiet az ah non in cherch. Arley Well done Harley, got to be the best piss take post to date
_________________
Dyane 12 1976 (ish)
If you don't play the game, don't make the fecking rules..
|
| March 9th, 2013, 6:14 pm |
|
|
Who is online |
Users browsing this forum: Bing [Bot] and 84 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
