View unanswered posts | View active topics It is currently May 14th, 2025, 1:57 pm



Reply to topic  [ 20 posts ]  Go to page 1, 2  Next
 Noise - manifold/carb? 
Author Message
Firing on two.
User avatar

Joined: April 18th, 2009, 8:01 pm
Posts: 947
Location: Paris/Manc
Post Noise - manifold/carb?
Ok turned off the stereo on my way back from manc meet and the engine sounded like a bag of bolts... Lot throatier than it should be and on the overrun there's a horrible tingling sound, almost like pinking but there's also a shit load of popping too. All the power is there, perhaps more than there was earlier, but I think that's to do with the sound :lol: Just sounds like a tractor and it really does sound like the engine is fucked on the overrun. Too dark to look now but I'm guessing its manifold/carb related? Anything to look for in particular? Sorry for being a noob,

James xox

_________________
Image


September 14th, 2012, 12:49 am
Profile
Firing on two.
User avatar

Joined: January 1st, 2009, 7:37 pm
Posts: 4708
Location: Disunited Kingdom
Post Re: Noise - manifold/carb?
Maybe check the top of the airbox is secure?

_________________
1988 built (1989 F-registered) Citroën 2CV-Six
2013 (63-Plate) VW Golf SE 1.4TSI BMT DSG7
1932 Morris Minor Open Two-Seater (The £100 car).
Image
Image


September 14th, 2012, 12:56 am
Profile
Agony Aunt - You have a car problem? Speak to Ken

Joined: March 6th, 2009, 1:40 am
Posts: 3675
Post Re: Noise - manifold/carb?
Or check the exhaust to see if an extra outlet has appeared, including around the crossbox?

ken

_________________
Image


September 14th, 2012, 1:02 am
Profile
Firing on two.
User avatar

Joined: January 16th, 2012, 11:54 pm
Posts: 121
Location: Aldershot
Post Re: Noise - manifold/carb?
Mine sounds exactly the as you have discribed yours.


September 14th, 2012, 10:38 am
Profile
Firing on two.
User avatar

Joined: April 18th, 2009, 8:01 pm
Posts: 947
Location: Paris/Manc
Post Re: Noise - manifold/carb?
Urgh found problem.... Huge chunk of plastic carb base missing.... Along with a sheared stud bolt being held nicely in place by the bottom of carb.... WTF.... Ok so I'll get a plastic thing ordered.... Will the carb be alright with just three bolts for a while though? I've got a spare manifold but going to uni a week tomorrow :( Also... HOW THE HELL HAS THIS HAPPENED?

_________________
Image


September 14th, 2012, 11:42 am
Profile
Firing on two.
User avatar

Joined: April 18th, 2009, 8:01 pm
Posts: 947
Location: Paris/Manc
Post Re: Noise - manifold/carb?
Or can I re-thread a new stud in somehow?

_________________
Image


September 14th, 2012, 11:46 am
Profile
Firing on two.
User avatar

Joined: April 18th, 2009, 8:01 pm
Posts: 947
Location: Paris/Manc
Post Re: Noise - manifold/carb?
Ok I might have just been talking bollocks... Is it even a stud?

_________________
Image


September 14th, 2012, 12:01 pm
Profile
Firing on two.
User avatar

Joined: January 16th, 2012, 11:54 pm
Posts: 121
Location: Aldershot
Post Re: Noise - manifold/carb?
Which part is broken? As the symptoms sound the same as mine. Really loud induction noise poping on overrun and jingling noise occasionally on load


September 14th, 2012, 12:06 pm
Profile
Firing on two.
User avatar

Joined: April 18th, 2009, 8:01 pm
Posts: 947
Location: Paris/Manc
Post Re: Noise - manifold/carb?
DaveB wrote:
Which part is broken? As the symptoms sound the same as mine. Really loud induction noise poping on overrun and jingling noise occasionally on load


Its the front stud on the manifold to carb mounting. I think the noise is more to do with the plastic gasket having a chunk missing, but which caused which, I don't know.

_________________
Image


September 14th, 2012, 12:09 pm
Profile
Firing on two.
User avatar

Joined: January 16th, 2012, 11:54 pm
Posts: 121
Location: Aldershot
Post Re: Noise - manifold/carb?
I'll have to have a look at mine in bit I think


September 14th, 2012, 12:22 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 20 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 96 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.