| Author |
Message |
|
Mr Unhinged
Firing on two.
Joined: July 17th, 2012, 10:56 pm
Posts: 242
Location: Slaaagh, Burks, Englund
|
 Re: Here,have some patina!!!!!!!!!!!!!!!!!!!!!!!!!!!!! richardmorris wrote: You can buy rusty paint now apparently.  Daft as its sounds Yes you can. I build Model Kits and there is this stuff you can buy that is roughly.. Iron Filings,PVA adhesive and saltwater. Paint on PVA, add Ironfilings ...Paint with saltwater. or Drive it through an English winter...
|
| August 21st, 2012, 10:21 pm |
|
|
|
Sean
Firing on two.
Joined: April 22nd, 2009, 11:06 pm
Posts: 3684
Location: Ecosse
|
Re: Here,have some patina!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Taskos wrote: I always feel a kind of embarrasmment when wash my 2CV.  good and so you should. 
_________________
Kissing the Lash
"Any advice of a technical nature is given on the understanding that I've actually done this shit, not just read about it in D*lly club mag some time ago.
|
| August 21st, 2012, 10:44 pm |
|
|
|
Taskos
Firing on two.
Joined: February 22nd, 2012, 10:34 am
Posts: 418
Location: Greece
|
Re: Here,have some patina!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Mr Unhinged, for plastic models try various amber/rust tones then hair spay then grinded salt and final colour coat. Then you can pick the colour out and reveal the rust. 
_________________
I've Been Wrong Before.
|
| August 22nd, 2012, 10:54 am |
|
|
|
Max
Beard
Joined: December 9th, 2008, 8:00 pm
Posts: 2003
|
Re: Here,have some patina!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
_________________
.
.
http://www.rollingonfour.co.uk
|
| August 22nd, 2012, 2:15 pm |
|
|
|
Mr Unhinged
Firing on two.
Joined: July 17th, 2012, 10:56 pm
Posts: 242
Location: Slaaagh, Burks, Englund
|
Re: Here,have some patina!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Taskos wrote: Mr Unhinged, for plastic models try various amber/rust tones then hair spay then grinded salt and final colour coat. Then you can pick the colour out and reveal the rust. Ive heard about that trick and i May well try it on my next project .
|
| August 24th, 2012, 12:03 am |
|
|
|
Mr Unhinged
Firing on two.
Joined: July 17th, 2012, 10:56 pm
Posts: 242
Location: Slaaagh, Burks, Englund
|
Re: Here,have some patina!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The right way to do it is leave it in a california Scrapyard for ages Im talking 20 or so years with the windows open in this case. Chuck a new engine in, stick it on a boat to England, replace pretty much most of the suspension and brakes, Window seals etc. Hit it with a Lowering stick, Replace the interior using Ply and the original Termite munched powdery pile of firewood in the back as a template.     and then run out of money selling the thing for much less than the resultant work
|
| August 24th, 2012, 12:13 am |
|
|
