|
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
| Author |
Message |
|
Old-Nail
Firing on two.
Joined: October 7th, 2009, 12:10 pm
Posts: 2192
Location: NWUK
|
 Leaking welch plug I noticed one of mine exudes some grease when I grease the king pins. It's the bottom one, should I be bothered?
_________________
'Democracy my Arse'
|
| November 6th, 2010, 2:24 pm |
 
|
|
|
602
Firing on two.
Joined: July 21st, 2010, 7:12 pm
Posts: 859
Location: Chatenet, France
|
Re: Leaking welch plug Old-Nail wrote: I noticed one of mine exudes some grease when I grease the king pins. It's the bottom one, should I be bothered? The idea of the taff plug and the threaded bottom plug is to seal the whole chamber so that when you put grease in it gets to the right places, if the thing leaks grease out under the pressure of the grease gun then it might not be getting to the king pin bushes.
_________________
No offence is implied or intended with any of my posts. I love you all, well most of you anyway.
|
| November 6th, 2010, 2:37 pm |
|
|
|
Old-Nail
Firing on two.
Joined: October 7th, 2009, 12:10 pm
Posts: 2192
Location: NWUK
|
Re: Leaking welch plug A tiny bit came out of the top too, so I took that to mean the grease was indeed travelling the whole way through. That isn't the same as reaching the bushes then I take it?
_________________
'Democracy my Arse'
|
| November 6th, 2010, 2:50 pm |
|
|
|
louise2cv
Firing on two.
Joined: December 23rd, 2008, 9:43 pm
Posts: 483
|
Re: Leaking welch plug I think that may mean the grease is taking the easiest path, so no probably not as much as it should be (through those tiny holes?).
_________________
|
| November 6th, 2010, 2:54 pm |
|
|
|
602
Firing on two.
Joined: July 21st, 2010, 7:12 pm
Posts: 859
Location: Chatenet, France
|
Re: Leaking welch plug Old-Nail wrote: A tiny bit came out of the top too, so I took that to mean the grease was indeed travelling the whole way through. That isn't the same as reaching the bushes then I take it? Not really. The space between the bushes and the pin is not very big so it does need a fair amount of grease gun pressure to reach it properly. If there is too much leaking then its not getting through.
_________________
No offence is implied or intended with any of my posts. I love you all, well most of you anyway.
|
| November 6th, 2010, 2:54 pm |
|
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 80 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
