Make Your Own ....2CV.... 4x4
| Author |
Message |
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
 Re: �Make Your Own ....2CV.... 4x4 Wires and exhaust don’t mix, will use an Ally channel to keep it tidy.
May wrap the exhaust when,,,, if it works all ok.
|
| October 2nd, 2020, 8:52 am |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
Re: �Make Your Own ....2CV.... 4x4 When the suspension drops, the springs wanted to come out of the spring tube, so they need a plate to keep them in situ. Attachment:
63A83646-F30B-4DD7-9396-E83522A0A745.jpeg [ 294.35 KiB | Viewed 8906 times ]
|
| October 3rd, 2020, 2:39 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
Re: �Make Your Own ....2CV.... 4x4 Shiny new carb, from EBay was remmended and 1/2 price, time will tell. Attachment:
5F4C6140-F1B3-44D8-ACF0-A6A73276E339.jpeg [ 425.23 KiB | Viewed 8852 times ]
Suspension at full droop. Attachment:
694A24D3-DF9D-49B7-B46A-FFD09A424817.jpeg [ 437.96 KiB | Viewed 8852 times ]
Suspension static load, abandoned the top plate in the spring can as it collides with the ram oil feed. Attachment:
61C07D0F-7C2D-4FA5-9E47-4C98BB614ED8.jpeg [ 418.54 KiB | Viewed 8852 times ]
|
| October 7th, 2020, 4:42 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
Re: �Make Your Own ....2CV.... 4x4 Still an A4 list of things to do, mostly assembling, figuring out the wiring few brackets to weld... Attachment:
8AFC2CD9-58D9-46D5-A8A4-113560831578.jpeg [ 438.11 KiB | Viewed 8809 times ]
|
| October 10th, 2020, 2:54 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
Re: �Make Your Own ....2CV.... 4x4 First start in a longtime, didn’t go well as water in the bottom of the tank, due to ethanol maybe?
Anyway after numerous fiddling, lighter fuel in the carb, took out the glass in line filter was leaking well, not good with the lpg heater nearby, the car runs well just static and now ticks over nicely.
Pumped up the tyres, need to remove all the stuff from inside to give it a driveway test!!
|
| October 17th, 2020, 2:37 pm |
|
|
|
jasu
Firing on two.
Joined: August 8th, 2012, 11:00 am
Posts: 501
Location: Korpilahti, Finland
|
Re: �Make Your Own ....2CV.... 4x4 subarupete wrote: need to remove all the stuff from inside to give it a driveway test!! You too? "A temporary storage", the car You don't use for a while..? Too easy to put stuff inside on any car what is standing still for longer than a week. Where all these stuff comes, can't say for sure, but anyway, there is always some extra stuff after some period...
|
| October 17th, 2020, 3:34 pm |
|
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am
Posts: 1634
Location: Exeter, Devon
|
Re: �Make Your Own ....2CV.... 4x4 It kinda creeps up on you doesnt it! Actually, this just me over loading the shed to take stuff to recycling.  I got some funny looks from motorway police patrols.  And a wave from a blood bike ...
Attachments:
File comment: Wood inside and outside :)
20201017_172624.jpg [ 1.34 MiB | Viewed 8735 times ]
_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
| October 17th, 2020, 7:00 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
Re: �Make Your Own ....2CV.... 4x4 Looks like you have been busy at IKEA. 
|
| October 18th, 2020, 8:59 am |
|
|
|
AZL57
Firing on two.
Joined: October 22nd, 2014, 10:59 pm
Posts: 2217
Location: South-Limburg
|
Re: �Make Your Own ....2CV.... 4x4 no they are original shed spare parts...
|
| October 18th, 2020, 4:07 pm |
|
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am
Posts: 1634
Location: Exeter, Devon
|
Re: �Make Your Own ....2CV.... 4x4 I get my spares from Wickes!
_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
| October 18th, 2020, 4:26 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 7 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
