| Author |
Message |
|
Two Chevrons
Firing on two.
Joined: August 17th, 2010, 11:47 pm
Posts: 194
Location: Chichester West Sussex
|
 Alternator id please
_________________
1972 dyane4 435cc
|
| June 24th, 2018, 6:01 pm |
|
|
|
Two Chevrons
Firing on two.
Joined: August 17th, 2010, 11:47 pm
Posts: 194
Location: Chichester West Sussex
|
Re: Alternator id please Sorry for the repeated pics
_________________
1972 dyane4 435cc
|
| June 24th, 2018, 6:02 pm |
|
|
|
Two Chevrons
Firing on two.
Joined: August 17th, 2010, 11:47 pm
Posts: 194
Location: Chichester West Sussex
|
Re: Alternator id please  This is my new acadiane does anyone recognise it
_________________
1972 dyane4 435cc
Last edited by Two Chevrons on June 24th, 2018, 6:33 pm, edited 1 time in total.
|
| June 24th, 2018, 6:31 pm |
|
|
|
Two Chevrons
Firing on two.
Joined: August 17th, 2010, 11:47 pm
Posts: 194
Location: Chichester West Sussex
|
Re: Alternator id please Thanks in advance
_________________
1972 dyane4 435cc
|
| June 24th, 2018, 6:32 pm |
|
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am
Posts: 1622
Location: Exeter, Devon
|
Re: Alternator id please Someone had a similar problem not to long ago. If I recall it was cured with new brushes. Heat expansion was breaking a contact.
_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
| June 24th, 2018, 7:27 pm |
|
|
|
Two Chevrons
Firing on two.
Joined: August 17th, 2010, 11:47 pm
Posts: 194
Location: Chichester West Sussex
|
Re: Alternator id please Thanks Roger worth a try, just need to source some now, we think she's a visa alternator
_________________
1972 dyane4 435cc
|
| June 24th, 2018, 8:07 pm |
|
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am
Posts: 1622
Location: Exeter, Devon
|
Re: Alternator id please Take them out and take a look. 
_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
| June 24th, 2018, 8:54 pm |
|
|
|
Two Chevrons
Firing on two.
Joined: August 17th, 2010, 11:47 pm
Posts: 194
Location: Chichester West Sussex
|
Re: Alternator id please I did that they look ok one is shorter than the other I did a resistance test on them when cold and was fine from the contact on the ring to the connector end
_________________
1972 dyane4 435cc
|
| June 24th, 2018, 11:36 pm |
|
|
|
bobh
Firing on two.
Joined: March 26th, 2010, 8:41 pm
Posts: 234
|
Re: Alternator id please The exciter wire looks like it has a nasty kink in it a couple of inches from the alternator. Is the wire good ?
|
| June 25th, 2018, 7:46 am |
|
|
|
Two Chevrons
Firing on two.
Joined: August 17th, 2010, 11:47 pm
Posts: 194
Location: Chichester West Sussex
|
Re: Alternator id please bobh wrote: The exciter wire looks like it has a nasty kink in it a couple of inches from the alternator. Is the wire good ? I'll check the resistance with a wiggle good spot!
_________________
1972 dyane4 435cc
|
| June 25th, 2018, 8:46 am |
|
|
Who is online |
Users browsing this forum: No registered users and 96 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
