| Author |
Message |
|
Russell
Firing on two.
Joined: November 29th, 2008, 10:05 pm
Posts: 9259
Location: West Sussex, U.K.
|
 Re: Snetterton 24 Hour http://www.2cvracing.co.uk/gallerythe bottom two galleries are from the weekend. Some pictures of I2F members.
_________________
samfieldhouse wrote: What I like about I2F is that there is no pretence of democracy.
|
| August 25th, 2010, 8:04 pm |
|
|
|
Sean
Firing on two.
Joined: April 22nd, 2009, 11:06 pm
Posts: 3684
Location: Ecosse
|
Re: Snetterton 24 Hour Russell wrote:
I'm gutted we had to cut the springs up, there was a massive WTF moment, followed by a lot of lolling.
It really was brilliant when folk who knew what it should be like saw them literally jaw dropping and all totally lost for words take any photos? ooh hang on ill need to check phone 
_________________
Kissing the Lash
"Any advice of a technical nature is given on the understanding that I've actually done this shit, not just read about it in D*lly club mag some time ago.
Last edited by Sean on August 25th, 2010, 10:40 pm, edited 1 time in total.
|
| August 25th, 2010, 9:50 pm |
|
|
|
Sean
Firing on two.
Joined: April 22nd, 2009, 11:06 pm
Posts: 3684
Location: Ecosse
|
Re: Snetterton 24 Hour
_________________
Kissing the Lash
"Any advice of a technical nature is given on the understanding that I've actually done this shit, not just read about it in D*lly club mag some time ago.
|
| August 25th, 2010, 10:22 pm |
|
|
|
Simon Crook
Firing on two.
Joined: June 14th, 2009, 10:27 pm
Posts: 752
|
Re: Snetterton 24 Hour CAKE 
Attachments:
cake.jpg [ 703.13 KiB | Viewed 4567 times ]
_________________
|
| August 25th, 2010, 10:45 pm |
|
|
|
Max
Beard
Joined: December 9th, 2008, 8:00 pm
Posts: 2003
|
Re: Snetterton 24 Hour Jesus christ.
_________________
.
.
http://www.rollingonfour.co.uk
|
| August 25th, 2010, 10:47 pm |
|
|
|
Jonathan
Firing on two.
Joined: January 1st, 2009, 7:37 pm
Posts: 4708
Location: Disunited Kingdom
|
Re: Snetterton 24 Hour CAKE +1
_________________
1988 built (1989 F-registered) Citroën 2CV-Six
2013 (63-Plate) VW Golf SE 1.4TSI BMT DSG7
1932 Morris Minor Open Two-Seater (The £100 car).
|
| August 25th, 2010, 10:59 pm |
|
|
|
toomany2cvs
Firing on two.
Joined: December 26th, 2008, 9:40 pm
Posts: 3332
Location: Surrounded by 2cvs...
|
Re: Snetterton 24 Hour Sean wrote: Russell wrote: I'm gutted we had to cut the springs up, there was a massive WTF moment, followed by a lot of lolling. It really was brilliant when folk who knew what it should be like saw them literally jaw dropping and all totally lost for words take any photos? ooh hang on ill need to check phone Aw, c'mon....?!?!?
_________________
Zookeeper of a miscellany of motorised silliness - from 0.75bhp to 9ft tall - now living life on the road in an old VW.
http://WhereverTheRoadGoes.com
|
| August 25th, 2010, 11:15 pm |
 
|
|
|
Russell
Firing on two.
Joined: November 29th, 2008, 10:05 pm
Posts: 9259
Location: West Sussex, U.K.
|
Re: Snetterton 24 Hour No front suspension or springs, but four rear springs, one of which was in tension, the other three in compression. Solid mounted cans, cut and shortened front tie rods, cut and lengthened rear tie rods, knife edges made interference fit by a machined bit of ally inserted into the shackles. I'm hoping that somebody has photos of it, it was quality.
_________________
samfieldhouse wrote: What I like about I2F is that there is no pretence of democracy.
|
| August 26th, 2010, 12:00 am |
|
|
|
Sean
Firing on two.
Joined: April 22nd, 2009, 11:06 pm
Posts: 3684
Location: Ecosse
|
Re: Snetterton 24 Hour it was the double spring, someone had cut the ends off 2 rear springs then wound them together to make a double wire, single helix this was randomly welded and loose in the can , the front spring cup and the rear spring cup were welded into either end of a spring so in essance it was working in tension the front was so stiff most of the spriging was the tie rod stretching before it broke, the rear had very little springing the knife edges made into something solid as Russ said , done with no understanding of how the knife edges work or the forces involved no pictures on the phone 
_________________
Kissing the Lash
"Any advice of a technical nature is given on the understanding that I've actually done this shit, not just read about it in D*lly club mag some time ago.
|
| August 26th, 2010, 7:47 am |
|
|
|
toomany2cvs
Firing on two.
Joined: December 26th, 2008, 9:40 pm
Posts: 3332
Location: Surrounded by 2cvs...
|
Re: Snetterton 24 Hour Oh.
My.
Gawd.
_________________
Zookeeper of a miscellany of motorised silliness - from 0.75bhp to 9ft tall - now living life on the road in an old VW.
http://WhereverTheRoadGoes.com
|
| August 26th, 2010, 8:36 am |
|
|
