At last !!!!!!
The workshop is ( almost ) empty.
Only a small Mazda 323 in the corner, but I am finally able to continue the work on the AZ .
I disassembled the car again , finished up some minor things that we had left on the chassis ( break line , fuel line, etc. ), and now I will finish off the body.
First I took on the RH front door, and I have a question about that.
The bottom part ( outside ) is very bad , from down upwards about 2 cm , the inside is fine. I have a spear door which is bad on the top, it is bend at the window-part .
What is the best way to replace the bad bottom part with the good part of the spear-door?
I shall try to upload some pictures, but I don 't know if I manage to do so.

Failed to upload the pictures, I have to have a new flickr account to do so.
I can't login.


New album created with Myalbum.com:

Maybe try to open the flange, but i think it's also spot welded.
Sand blast the edge and fill it up with lead filler. But you need to find someone that knows how to fill it with lead/tin. (Smeertin)

Oké, that is a very good suggestion.
Thank you for that .

[url][/url]
[url][/url]
[url][/url]
[url][/url]

My son and I have taken up the work on the AZ again.
It is just almost impossible to get pictures posted .
It is not Intern 2cv fr , it is Myalbum.

Oh wow. That is seriously impressive! I wish I could weld, I've never tried. This looks very advanced level bodywork those!

my son had an education in fine mechanics and turning and welding, soldering small metal objects .
That is very usefull now.

Yes you can build a 2cv from welded together small metal objects...

Than it is called art.
That is more like Edd China

Is that stick, mig, or tig?

MIG.