Crankcase breather/Reniflard is it duff?
| Author |
Message |
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2241
Location: Near Monmouth
|
 Re: Crankcase breather/Reniflard is it duff? Grind round the joint, just enough to remove the fold, each half SHOULD have a shoulder.
I had some alu rings laser cut, that when bolted up, pull the two halves together, the two rings one complete others one in two parts... if memory is working....ABS should work for the rings, minimal loading...
|
| April 9th, 2021, 4:51 pm |
|
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am
Posts: 1600
Location: Exeter, Devon
|
Re: Crankcase breather/Reniflard is it duff? So Pete ...
Do you have any reed material left?
Are you intending to start a new one, or try this on the one you have already converted?
_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
| April 9th, 2021, 7:43 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2241
Location: Near Monmouth
|
Re: Crankcase breather/Reniflard is it duff? Material ————— yes
Another ————— yes
Waiting ABS parts - yes
|
| April 9th, 2021, 8:32 pm |
|
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am
Posts: 1600
Location: Exeter, Devon
|
Re: Crankcase breather/Reniflard is it duff? I guess your sorted for a clamp .....
_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
| April 9th, 2021, 8:47 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2241
Location: Near Monmouth
|
Re: Crankcase breather/Reniflard is it duff? Clamp —- no I gave all the bits away in Belgium.
Try to cost the parts, may be sell on the forum,
|
| April 10th, 2021, 9:28 am |
|
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am
Posts: 1600
Location: Exeter, Devon
|
Re: Crankcase breather/Reniflard is it duff? Just on a fuel injection site and had a thought! ..... that's 2 already this year!
My engine management cpu has a MAP sensor. It would be interesting to read the crank case vacuum.
If I recall, its usually read from the dip stick hole, is that right?
what would be good readings?
_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
| April 10th, 2021, 11:59 am |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2241
Location: Near Monmouth
|
Re: Crankcase breather/Reniflard is it duff?
|
| April 10th, 2021, 5:46 pm |
|
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am
Posts: 1600
Location: Exeter, Devon
|
Re: Crankcase breather/Reniflard is it duff?
_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
| April 10th, 2021, 5:58 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2241
Location: Near Monmouth
|
Re: Crankcase breather/Reniflard is it duff? The crankcase vacuum is minimal, need a sensitive unit ....BMP 180 I2C mounted in an air tight box?.....
|
| April 10th, 2021, 6:13 pm |
|
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am
Posts: 1600
Location: Exeter, Devon
|
Re: Crankcase breather/Reniflard is it duff? How much lift do you think the reeds need? How much would the rubber ring have given?
_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
| April 11th, 2021, 12:53 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 16 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
