We have liftoff.....AZU 250 rebuild thread
Author |
Message |
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm Posts: 2151 Location: Near Monmouth
|
Re: We have liftoff.....AZU 250 rebuild thread
Great bit of fabrication work.
|
September 28th, 2020, 7:09 pm |
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am Posts: 1581 Location: Exeter, Devon
|
Re: We have liftoff.....AZU 250 rebuild thread
Its amazing what you can do with a hula hoop! Love it.
_________________ If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
September 28th, 2020, 7:42 pm |
|
|
48pop
Firing on two.
Joined: May 23rd, 2011, 7:14 pm Posts: 309 Location: ecosse
|
Re: We have liftoff.....AZU 250 rebuild thread
Due to tight confines of the adapter, i needed to buy some M7 allen head bolts........12 quid for 5 !!!
Damn you Citroen and your M7 fetish !
|
September 28th, 2020, 7:58 pm |
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am Posts: 1581 Location: Exeter, Devon
|
Re: We have liftoff.....AZU 250 rebuild thread
I drilled and tapped to M8
_________________ If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
September 28th, 2020, 8:19 pm |
|
|
48pop
Firing on two.
Joined: May 23rd, 2011, 7:14 pm Posts: 309 Location: ecosse
|
Re: We have liftoff.....AZU 250 rebuild thread
OK, doing a bit of a dash swap today, simple and now MPH...... I find I have a few spaces, I've seen blanks for the wee round holes, are blanks available for the rectangular holes ?? Also, I need a working wiper switch...anyone have these bits for sale? Swap was very awkward and fiddly....... Mostly working and I now have an oil warning light......and, no front lights.....Will get it finished over next week !
|
October 4th, 2020, 11:28 pm |
|
|
Geert
Firing on two.
Joined: July 10th, 2010, 12:35 pm Posts: 1094 Location: Magyarország
|
Re: We have liftoff.....AZU 250 rebuild thread
Ask Roger V if he can print these blanks . He owns a 3D printer as I understand
_________________ 'T is een kwestie van geduld.........
Ez a türelem kérdése.........
|
October 5th, 2020, 9:41 am |
|
|
AZL57
Firing on two.
Joined: October 22nd, 2014, 10:59 pm Posts: 2009 Location: South-Limburg
|
Re: We have liftoff.....AZU 250 rebuild thread
The little lights you can take out of the other dash they are the same. Dash is normally fixed with this type of lense shape screws.
You do not have the required permissions to view the files attached to this post.
|
October 5th, 2020, 11:08 am |
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am Posts: 1581 Location: Exeter, Devon
|
Re: We have liftoff.....AZU 250 rebuild thread
I moved my hazard switch to the left side. The two holes at the top I use for left and right indicators. The wiper switch stayed in the bottom right corner. However, in the square hole above it, i have repurposed the brake fluid test bulb button to operate the electric windscreen washer pump.
_________________ If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
October 5th, 2020, 11:42 am |
|
|
Ianredspecial
Firing on two.
Joined: June 22nd, 2014, 8:09 pm Posts: 1180 Location: Reading, Berks UK
|
Re: We have liftoff.....AZU 250 rebuild thread
Electric washer pump?? Poshe.
|
October 6th, 2020, 12:16 am |
|
|
48pop
Firing on two.
Joined: May 23rd, 2011, 7:14 pm Posts: 309 Location: ecosse
|
Re: We have liftoff.....AZU 250 rebuild thread
OK, confused.......
As above, I've swapped the dash. Car starts and runs, I have tail lights, indicator and horn.....I have no front lights, nothing, no sidelights, no dipped headlights and no full beam.
I did have the lightswitch disconnected but I have checked and its all back as before. My meter says I have 12+ volts coming to switch and when I turn the knob, 12+ volts at all other terminals (except horn)
Any thoughts on what I've missed before I tear it all out again.....?
(I had lights before the swap)
|
October 7th, 2020, 2:45 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 313 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|