| Author |
Message |
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm
Posts: 2846
Location: NL
|
 Re: �Make Your Own ....2CV.... 4x4 subarupete wrote: Wow views of 127203, sadly 50% are probably "bots". Well keep the posts comming then...
_________________
Russell wrote: Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ
|
| April 16th, 2020, 12:10 pm |
 
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2140
Location: Near Monmouth
|
Re: �Make Your Own ....2CV.... 4x4 Road car is ready to MOT---- Steering done, new carb (emissions were Bad), lights fixed.
But MOT's hold for non essential cars etc.
So some updates soon on the 4x4
|
| April 16th, 2020, 1:54 pm |
|
|
|
Geert
Firing on two.
Joined: July 10th, 2010, 12:35 pm
Posts: 1094
Location: Magyarország
|
Re: �Make Your Own ....2CV.... 4x4 Good luck !!!
_________________
'T is een kwestie van geduld.........
Ez a türelem kérdése.........
|
| April 16th, 2020, 8:02 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2140
Location: Near Monmouth
|
Re: �Make Your Own ....2CV.... 4x4 The saga begins.. Attachment:
P1000675.jpg [ 330.47 KiB | Viewed 4384 times ]
The transfer box/Diff problem, (I think !?). Attachment:
P1000676 (1).jpg [ 171.85 KiB | Viewed 4384 times ]
The solution..... Attachment:
P1000677 (1).jpg [ 183.3 KiB | Viewed 4384 times ]
|
| April 19th, 2020, 4:20 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2140
Location: Near Monmouth
|
Re: �Make Your Own ....2CV.... 4x4 Engine and box out, rear gears dismantled, appear to be well lubricated.... Attachment:
A0FF72D5-C00D-4C59-9001-E304B5FF1603.jpeg [ 838.47 KiB | Viewed 4334 times ]
|
| April 22nd, 2020, 2:30 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2140
Location: Near Monmouth
|
Re: �Make Your Own ....2CV.... 4x4 The whole saga began. Test drove the car, up the road and round the field. All went well... Let the car stand for about 5 weeks + started the car , nasty sound from gearbox, push the clutch to the floor, noise stopped, let clutch up noise come back. ASSUMED it was the input shaft bearing!!! Have examined the clutch housing, it was clean when it got assembled and had been used before. The bell housing has some black dust and some aluminuim filings??? Will look at clutch and release bearing. The saga continues, took the box apart, all the bearings have oil and so no signs of running dry? But have modified the box anyway... Before modification. Attachment:
IMG_0074.jpg [ 404.65 KiB | Viewed 4303 times ]
Modified box Attachment:
IMG_0077.jpg [ 384.56 KiB | Viewed 4303 times ]
|
| April 23rd, 2020, 5:23 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2140
Location: Near Monmouth
|
Re: �Make Your Own ....2CV.... 4x4 Progess today.... Attachment:
P1000678.jpg [ 248.09 KiB | Viewed 4286 times ]
|
| April 24th, 2020, 3:36 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2140
Location: Near Monmouth
|
Re: �Make Your Own ....2CV.... 4x4 Another modification/addition. Attachment:
A0DE8AA2-DC1C-464F-9EC2-A3CDC089F26E.jpeg [ 617.65 KiB | Viewed 4266 times ]
|
| April 25th, 2020, 5:38 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: �Make Your Own ....2CV.... 4x4 You're into the world of the sublime Pete  Good stuff!
|
| April 25th, 2020, 5:56 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2140
Location: Near Monmouth
|
Re: �Make Your Own ....2CV.... 4x4 While I have the engine and box out, I am trying to see if I can move the struts. Currently even with softer springs the front is too hard. Move the strut bottom mount to miss the steering and fit under the bonnet, needs some carful measurements!! Short bottom mount. Attachment:
248CF61A-CC25-4C04-B227-35E139B9EDAD.jpeg [ 473.91 KiB | Viewed 4246 times ]
Pivot point to miss the steering tie rod? Yellow line is the sweet spot. Attachment:
4D54EC4E-B3DA-4E56-83A4-0C49C0C107FD.jpeg [ 442.29 KiB | Viewed 4246 times ]
|
| April 26th, 2020, 2:23 pm |
|
|
