| Author |
Message |
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2142
Location: Near Monmouth
|
 Re: Make Your Own ....2CV.... 4x4 Wiring in the Car. Attachment:
P1000508.jpg [ 350.58 KiB | Viewed 5982 times ]
Wiring under the Bonnet. Attachment:
P1000509.jpg [ 371.6 KiB | Viewed 5982 times ]
Wiring ToDo Basics. Headlamps, Side, Indicators, Horn. New Battery +VE and connections to main loom. Extras bits +++.
|
| July 16th, 2019, 1:23 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2142
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Fuel Tank Fitted. Base is bolted to the floor and to the inner wing. Attachment:
P1000510.jpg [ 284.05 KiB | Viewed 5944 times ]
|
| July 23rd, 2019, 5:48 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2142
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 New main gearbox lever and try out for the Transfer box lever, new mount to be fabricated. Attachment:
P1000529.jpg [ 310.81 KiB | Viewed 5790 times ]
Revised shift pattern Attachment:
P1000535.jpg [ 143.5 KiB | Viewed 5790 times ]
Transfer box end of gear lever. Attachment:
P1000533.jpg [ 316.78 KiB | Viewed 5790 times ]
|
| August 19th, 2019, 3:21 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2142
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Gear Lever (Scratch Head Moment's) Transfer box new lever. Now vertical, needs sanding and paint. Attachment:
P1000536.jpg [ 311.37 KiB | Viewed 5778 times ]
Attachment:
P1000537.jpg [ 323.24 KiB | Viewed 5778 times ]
Lever End. Mount for the lever and linkage that doesn't interfere with the seats or the seat rails Attachment:
P1000539.jpg [ 236.62 KiB | Viewed 5778 times ]
|
| August 20th, 2019, 3:15 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2142
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Transfer box Lever. Mounted to the same bit of chassis as the rear gear box support. Need the nuts to be recessed as the foul the lever a bit. Attachment:
P1000540.jpg [ 242.75 KiB | Viewed 5761 times ]
Both ends now connected and it allows selection! Attachment:
P1000543.jpg [ 298.4 KiB | Viewed 5761 times ]
|
| August 21st, 2019, 5:16 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2142
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Transfer Box new knob Revised pattern due to the linkage used, Attachment:
P1000546.jpg [ 198.52 KiB | Viewed 5744 times ]
Final Mounting (famous last words) Slot cut out to clear seat frame. Attachment:
P1000544.jpg [ 235.55 KiB | Viewed 5744 times ]
|
| August 22nd, 2019, 3:34 pm |
|
|
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm
Posts: 2846
Location: NL
|
Re: Make Your Own ....2CV.... 4x4 I.m still not sure which way round..
Design follows function or function follows design...
Hmmmmm...
Well the result is looking awsome.. (at least in my eyes).
_________________
Russell wrote: Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ
|
| August 22nd, 2019, 4:46 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2142
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Thanks Geo, Hope to test it on the road (track) soon. Need to fix the LDS pump/pipes/wiring for the suspension so it has some damping, at the moment the rear is like a Kangaroo. Had is running a number of times, vibrates as the engine mounts are (through)bolted, when I carefully engage the clutch, more vibration from the extra shaft  , gave it lots of revs and it has stayed together 
|
| August 22nd, 2019, 5:56 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2142
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Tight fit for gear lever. Attachment:
P1000549.jpg [ 198.48 KiB | Viewed 5672 times ]
Support for LDS tank. Attachment:
P1000548.jpg [ 269.89 KiB | Viewed 5672 times ]
|
| August 29th, 2019, 6:04 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Make Your Own ....2CV.... 4x4 Well it's not like you'll be racing through the gears Loving this build 
|
| August 29th, 2019, 6:45 pm |
|
|
