Author |
Message |
Geert
Firing on two.
Joined: July 10th, 2010, 12:35 pm Posts: 1134 Location: Magyarország
|
Re: My Beduino
I once was at a farm in the West Midlands. This farmer kept his spare tools in several rabbit hutches, spread all over the farm, so he never was far away from tools .
_________________ 'T is een kwestie van geduld.........
Ez a türelem kérdése.........
|
March 10th, 2019, 8:23 am |
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am Posts: 1592 Location: Exeter, Devon
|
Re: My Beduino
My friend does take that approach, but without the rabbit hutches. There are sets of spanners and Allen keys at specific buildings. However, we all prefer to use our favourite tools. This was an electrical project, and though I had the big box of fittings, I left my crimper at T'farm. You,can't double up everything.
_________________ If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
March 10th, 2019, 9:27 am |
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am Posts: 1592 Location: Exeter, Devon
|
Re: My Beduino
Time to install windows with rubber seals rather than have them glued in as the glue is becoming a bit unstuck. The missing one here is somewhere on the side of the motorway during a stormy trip last week!
Really wishing I had square or round holes rather than this shape.
Attachments:
IMG_20190323_125911.jpg [ 414.44 KiB | Viewed 6550 times ]
_________________ If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
March 23rd, 2019, 3:06 pm |
|
|
AZL57
Firing on two.
Joined: October 22nd, 2014, 10:59 pm Posts: 2088 Location: South-Limburg
|
Re: My Beduino
Close the side up and make a van of it. Or punt an large plexiglass sheet over all the side?
|
March 23rd, 2019, 7:00 pm |
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am Posts: 1592 Location: Exeter, Devon
|
Re: My Beduino
I fall out of love with the Shed occasionally. I've made a template for cutting the seal. Angles are 110 and 70. So I new to cut them at 55 and 35 degrees. Gotta keep the inside inside, and the outside outside. Does my head in.
_________________ If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
March 23rd, 2019, 8:39 pm |
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am Posts: 1592 Location: Exeter, Devon
|
Re: My Beduino
AZL57 I like your thinking, with I had that idea before I bought the seals. Still, it will look awesome when I've done it. Just gotta keep telling myself that.
_________________ If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
March 23rd, 2019, 8:59 pm |
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am Posts: 1592 Location: Exeter, Devon
|
Re: My Beduino
Damn, I hate these windows.
So! Its measure once and cut twice!!!!
_________________ If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
March 25th, 2019, 9:25 pm |
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am Posts: 1592 Location: Exeter, Devon
|
Re: My Beduino
I had a trigger wheel machined into the flywheel. Both the engineer and I are both on a learning curve here, so we will see how it works out.
Attachments:
IMG_20190329_162908.jpg [ 890.28 KiB | Viewed 6477 times ]
_________________ If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
March 29th, 2019, 7:17 pm |
|
|
ken
Agony Aunt - You have a car problem? Speak to Ken
Joined: March 6th, 2009, 1:40 am Posts: 3675
|
Re: My Beduino
Rebalanced afterwards?
_________________
|
March 29th, 2019, 7:47 pm |
|
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm Posts: 2847 Location: NL
|
Re: My Beduino
Roger V wrote: I had a trigger wheel machined into the flywheel. Both the engineer and I are both on a learning curve here, so we will see how it works out. 60-2?
_________________
Russell wrote: Hi Geo, you've been one of the sites biggest attractions in recent years. Russ
|
March 29th, 2019, 9:48 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 9 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|