| Author |
Message |
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2141
Location: Near Monmouth
|
 Re: Make Your Own ....2CV.... 4x4 Hi Harley
My thoughts are that it would jump out and bite me! it will still be covered.
|
| October 6th, 2018, 8:34 am |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2141
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Three more bits of the puzzle done. Clutch cable (from a Burton/Lomax) fitted and functions. Attachment:
P1000213.jpg [ 361.23 KiB | Viewed 4730 times ]
AK Track rod ends fitted, allows the track rod to fully clear the suspension arm on droop. Waiting for the shorter AK track rod arms to arrive. Attachment:
P1000215.jpg [ 292.13 KiB | Viewed 4730 times ]
Fitted the pipe and new clamp for the low pressure LDS fluid return to the tank. Attachment:
P1000214.jpg [ 313.59 KiB | Viewed 4730 times ]
|
| October 17th, 2018, 2:39 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2141
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Having larger tyres, reduces the turning circle, so I thought, longer studs and a 10mm spacer would improve things. Now 2cv wheels studs are different (!) they have a 16mm shoulder, so tried to find some with a 16mm shoulder, no luck. But an enquiry to a firm that makes studs, came back with a Quote of £11.25p Each! excluding shipping and vat . Peugeot wheel bolts are the same thread as the 2cv, so bit of work in the lathe and there we go £2.05p delivered. some pics... Bolt Before. Attachment:
s-l1600.jpg [ 75.64 KiB | Viewed 4696 times ]
Bolt After Attachment:
P1000232.jpg [ 167.66 KiB | Viewed 4696 times ]
Fitted (Not yet welded) Attachment:
P1000233.jpg [ 177.1 KiB | Viewed 4696 times ]
|
| October 23rd, 2018, 4:45 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2141
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Back in the dry and warm garage, but not a lot of space to do work. Major jobs to be done. Weld prop shaft Tunnel. Make an exhaust system. Weld the rear floors. Fit fuel tank securely. Connect up the suspension pump pipes and wiring. Wiring to make it run. Solve the brake master cylinder ISSUE????. Then TEST it 
|
| November 15th, 2018, 2:37 pm |
|
|
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm
Posts: 2846
Location: NL
|
Re: Make Your Own ....2CV.... 4x4 Did you already do a high rev test to ypur homemade propshaft between the master and the slave gearbox, otherwise I would do this first, to eleminate disappointment afterwarts......
_________________
Russell wrote: Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ
|
| November 15th, 2018, 5:10 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2141
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 It is a precision gound, precision machined and precision tig welded item, what can go wrong.....
|
| November 15th, 2018, 7:36 pm |
|
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am
Posts: 1581
Location: Exeter, Devon
|
Re: Make Your Own ....2CV.... 4x4 I have every confidence in you boss.
_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
| November 15th, 2018, 7:43 pm |
|
|
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm
Posts: 2846
Location: NL
|
Re: Make Your Own ....2CV.... 4x4 subarupete wrote: It is a precision gound, precision machined and precision tig welded item, what can go wrong..... think about 6000 rpm.. 2 gearboxes which warps both to the opposite side when under torq.. hmmm I would say "everything"...
_________________
Russell wrote: Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ
|
| November 15th, 2018, 9:00 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2141
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4
|
| November 15th, 2018, 10:15 pm |
|
|
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm
Posts: 2846
Location: NL
|
Re: Make Your Own ....2CV.... 4x4 https://m.youtube.com/watch?v=gmV4qwLfOMYimagin this is only 60 rpm.. yours will be 100 times faster..
_________________
Russell wrote: Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ
|
| November 15th, 2018, 10:42 pm |
|
|
