| Author |
Message |
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 870
Location: Rhayader Mid Wales
|
 Re: Make Your Own ....2CV.... 4x4 Jeez Pete, you're well into it now! The flaming thing should be strong enough. You're not planning on dropping it out of a helicopter ...are you 
|
| July 31st, 2017, 7:03 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2148
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Over Engineering is easier to do, some of my previous work broke or bent, but in my defence off-roading does test things to the limit.
|
| July 31st, 2017, 8:10 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2148
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Gear Levers... Attachment:
IMG_1264.jpg [ 289.25 KiB | Viewed 4357 times ]
|
| August 1st, 2017, 4:24 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2148
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Remote Gearbox bits. Attachment:
IMG_1290.jpg [ 276.59 KiB | Viewed 4308 times ]
Attachment:
IMG_1291.jpg [ 262.53 KiB | Viewed 4308 times ]
|
| August 11th, 2017, 6:28 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2148
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Fitting the Floors! Attachment:
IMG_1306.jpg [ 392.83 KiB | Viewed 4276 times ]
See https://youtu.be/ZuLqfQC3KSY
Attachments:
IMG_1307.jpg [ 429.97 KiB | Viewed 4276 times ]
|
| August 16th, 2017, 3:07 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2148
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Transmission Tunnel? Re-used the old floors and gearbox cover. Make do and mend as the saying goes. Attachment:
IMG_1313.jpg [ 435.9 KiB | Viewed 4248 times ]
Attachment:
IMG_1314.jpg [ 342.76 KiB | Viewed 4248 times ]
|
| August 24th, 2017, 2:49 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2148
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Oil Seal Plates for the Front Diff. Over zealous with the Mill  Attachment:
IMG_1332.jpg [ 271.59 KiB | Viewed 4209 times ]
|
| September 1st, 2017, 4:12 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2148
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Lots of Lathe/Mill/Drill/Gears/Bearings etc.. Front Diff is almost complete. Attachment:
IMG_1333.jpg [ 340.78 KiB | Viewed 4184 times ]
Attachment:
IMG_1334.jpg [ 330.59 KiB | Viewed 4184 times ]
|
| September 7th, 2017, 1:56 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 870
Location: Rhayader Mid Wales
|
Re: Make Your Own ....2CV.... 4x4 Beautiful! 
|
| September 7th, 2017, 7:39 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2148
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Attachment:
IMG_1343.jpg [ 376.42 KiB | Viewed 4141 times ]
|
| September 13th, 2017, 2:45 pm |
|
|
