| Author |
Message |
|
Nelsthebass
Firing on two.
Joined: October 5th, 2009, 8:22 pm
Posts: 1415
Location: Stone, Staffs
|
 Re: Spunkbucket Proper botch job! Not entirely sure that's the right carb for that style of filter......
_________________
1987 2CV Special
2014 Suzuki Swift Sport
2015 Lexus NX300h
1966 Ami Break
|
| March 1st, 2015, 5:18 pm |
|
|
|
Russell
Firing on two.
Joined: November 29th, 2008, 10:05 pm
Posts: 9259
Location: West Sussex, U.K.
|
Re: Spunkbucket If that's £1400 worth I don't know what I'm doing wasting my time fixing this, I might as well throw the body away and sell it for a £600 instant profit?
_________________
samfieldhouse wrote: What I like about I2F is that there is no pretence of democracy.
|
| March 1st, 2015, 6:28 pm |
|
|
|
Russell
Firing on two.
Joined: November 29th, 2008, 10:05 pm
Posts: 9259
Location: West Sussex, U.K.
|
Re: Spunkbucket Sean wrote: Re B&Q 'Spose its a "Convenience premium" not everyone needs or would be able to pick up 6m lengths of M8 studding and what a waste throwing 5.95m of studding up in the roof of the garage for it to sit waiting till you need another 50mm to fix the patio furniture or whatever people use 4.5 grade(AKA chocolate) threaded studding for Well that's how they got me, I wanted it there and then on my way to work, I assumed it'd be a quid or two. I nearly choked when the woman said '£10 please' for two meters of it. I almost walked out but That would have meant my speakers sitting on the floor for another week while I waited for the steel people to deliver. I'm certainly wise to it now though.
_________________
samfieldhouse wrote: What I like about I2F is that there is no pretence of democracy.
|
| March 1st, 2015, 6:32 pm |
|
|
|
ken
Agony Aunt - You have a car problem? Speak to Ken
Joined: March 6th, 2009, 1:40 am
Posts: 3675
|
Re: Spunkbucket It's not the right carburettor for any A series, that's the problem...  Nelsthebass wrote: Proper botch job! Not entirely sure that's the right carb for that style of filter......
_________________
|
| March 1st, 2015, 6:51 pm |
|
|
|
citroenboat
Firing on two.
Joined: November 11th, 2010, 4:19 pm
Posts: 590
|
Re: Spunkbucket ken wrote: It's not the right carburettor for any A series, that's the problem... The 67 AZU came with (a very knackered) Zenith 28mm carb on it, is that original or is it as above?
_________________
Mike
|
| March 2nd, 2015, 10:56 am |
|
|
|
ken
Agony Aunt - You have a car problem? Speak to Ken
Joined: March 6th, 2009, 1:40 am
Posts: 3675
|
Re: Spunkbucket A Zenith for an early engine would be a 2 stud fixing. This is the 4 stud manifold on a late 602 engine and that carburettor on it 'fits where it hits'...  citroenboat wrote: ken wrote: It's not the right carburettor for any A series, that's the problem... The 67 AZU came with (a very knackered) Zenith 28mm carb on it, is that original or is it as above?
_________________
|
| March 2nd, 2015, 12:57 pm |
|
|
|
Harley
Firing on two.
Joined: May 3rd, 2009, 11:40 am
Posts: 816
Location: Melbourne, Australia.
|
Re: Spunkbucket
_________________
samfieldhouse wrote: It is M9 for the shocks yes, the rest I'll check when next i'm underneath her. Ironically, this will be valentines day.
|
| March 2nd, 2015, 3:58 pm |
|
|
|
citroenboat
Firing on two.
Joined: November 11th, 2010, 4:19 pm
Posts: 590
|
Re: Spunkbucket ken wrote: A Zenith for an early engine would be a 2 stud fixing. This is the 4 stud manifold on a late 602 engine and that carburettor on it 'fits where it hits'... Erm... The question about the '67 AZU, wot I have, was whether the Zenith carb that was on it's 425 engine might have been original...?
_________________
Mike
|
| March 2nd, 2015, 7:09 pm |
|
|
|
ken
Agony Aunt - You have a car problem? Speak to Ken
Joined: March 6th, 2009, 1:40 am
Posts: 3675
|
Re: Spunkbucket In that case...  http://www.2cvgb.co.uk/forum/showthread ... ght=zenithcitroenboat wrote: ken wrote: A Zenith for an early engine would be a 2 stud fixing. This is the 4 stud manifold on a late 602 engine and that carburettor on it 'fits where it hits'... Erm... The question about the '67 AZU, wot I have, was whether the Zenith carb that was on it's 425 engine might have been original...?
_________________
|
| March 2nd, 2015, 7:38 pm |
|
|
|
Roy Eastwood
Firing on two.
Joined: February 4th, 2009, 2:52 pm
Posts: 268
|
Re: Spunkbucket
_________________
602 for life, yes and a living - someone has to!
|
| March 2nd, 2015, 9:01 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 37 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
