| Author |
Message |
|
ayjay
Firing on two.
Joined: April 27th, 2012, 6:48 pm
Posts: 709
|
 red ignition light query the red ignition light on the 2cv the light that goes out upon the alternator charging  can anyone tell me where it connects to?(the excitor maybye)?? ive checked all of the wiring diagrams btw but no luck----- i know one bulb wire goes to earth but where to connect tother? thanks for any info fellas
|
| August 13th, 2014, 8:02 pm |
|
|
|
ken
Agony Aunt - You have a car problem? Speak to Ken
Joined: March 6th, 2009, 1:40 am
Posts: 3675
|
Re: red ignition light query You mean the "LOW OIL PRESSURE WARNING" light, I do believe...  The light on the dash is connected to the switch on the nearside of the engine; 'low or no' oil pressure/light is on, adequate pressure/light is off. ayjay wrote: the red ignition light on the 2cv the light that goes out upon the alternator charging can anyone tell me where it connects to?(the excitor maybye)?? ive checked all of the wiring diagrams btw but no luck----- i know one bulb wire goes to earth but where to connect tother? thanks for any info fellas
_________________
|
| August 13th, 2014, 8:29 pm |
|
|
|
AZS
Firing on two.
Joined: December 22nd, 2013, 5:01 am
Posts: 300
Location: Netherlands
|
Re: red ignition light query Should be connected at the oil pressure switch, switch connects to earth when oil pressure gets to low, other side on the light must me connected to positive.
|
| August 13th, 2014, 10:23 pm |
|
|
|
ayjay
Firing on two.
Joined: April 27th, 2012, 6:48 pm
Posts: 709
|
Re: red ignition light query a,hhh so theres no charging light? we,ve wired a light to the oil pressure sender to a different light btw its the bottom red light on the right hand side of the dashboard on a d-olly no wonder i couldn,t find it on any of the wiring diagrams 
|
| August 14th, 2014, 12:15 am |
|
|
|
Sean
Firing on two.
Joined: April 22nd, 2009, 11:06 pm
Posts: 3684
Location: Ecosse
|
Re: red ignition light query thats the brake fluid level then  perhaps its time to get the Haynes out and flick to the back pages....not the clearest of diagrams due to the adoption of the confusing schematic but 5 mis coloring it in with the kids felt tips, its a decent working tool.
_________________
Kissing the Lash
"Any advice of a technical nature is given on the understanding that I've actually done this shit, not just read about it in D*lly club mag some time ago.
|
| August 14th, 2014, 8:16 am |
|
|
|
ayjay
Firing on two.
Joined: April 27th, 2012, 6:48 pm
Posts: 709
|
Re: red ignition light query fhanks for the info fellas we are useing an american loom from ebay btw righ fun and games 
|
| August 14th, 2014, 3:55 pm |
|
|
|
smyth602
Haggis Muncher
Joined: September 13th, 2012, 7:38 pm
Posts: 571
Location: Denny, Scotland
|
Re: red ignition light query that sounds like a massive pain in the ass considering you can spend 50 quid and pretty much buy all the bits you need to make a loom from scratch and customize it all you need.
|
| August 14th, 2014, 5:00 pm |
|
|
|
samfieldhouse
Firing on two.
Joined: February 11th, 2009, 12:32 am
Posts: 3324
Location: Chichester, West Sussex
|
Re: red ignition light query smyth602 wrote: that sounds like a massive pain in the ass considering you can spend 50 quid and pretty much buy all the bits you need to make a loom from scratch and customize it all you need. Agreed  Don't forget the brake fluid warning check lights is MOT-able.
|
| August 15th, 2014, 11:02 am |
|
|
