Author |
Message |
Matt_S
Firing on two.
Joined: July 28th, 2010, 11:50 pm Posts: 590 Location: Northumberland
|
 Re: LGY 275P Rises Again!
I'll be lucky Paul, doesn't even give it the time of day let alone give me a hand with it!!! I have to struggle on, on my own 
_________________

Dyane 12 1976 (ish)
If you don't play the game, don't make the fecking rules..
|
June 13th, 2014, 11:48 pm |
|
 |
Matt_S
Firing on two.
Joined: July 28th, 2010, 11:50 pm Posts: 590 Location: Northumberland
|
 Re: LGY 275P Rises Again!
The garage door has been opened and a few hours ( well a while anyway) might be spent having a play... Wish me luck 
Attachments:
image.jpg [ 237.48 KiB | Viewed 17513 times ]
_________________

Dyane 12 1976 (ish)
If you don't play the game, don't make the fecking rules..
|
June 21st, 2014, 5:09 pm |
|
 |
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm Posts: 2847 Location: NL
|
 Re: LGY 275P Rises Again!
Ok. nobody else seems to do it...... Good luck..
_________________
Russell wrote: Hi Geo, you've been one of the sites biggest attractions in recent years. Russ
|
June 21st, 2014, 7:15 pm |
|
 |
fritz
Firing on two.
Joined: July 14th, 2010, 1:21 am Posts: 158 Location: Devon
|
 Re: LGY 275P Rises Again!
Good luck!!
_________________
|
June 21st, 2014, 8:00 pm |
|
 |
Matt_S
Firing on two.
Joined: July 28th, 2010, 11:50 pm Posts: 590 Location: Northumberland
|
 Re: LGY 275P Rises Again!
Cheers but it Just seemed to be too bloody heavy, and stuck it wouldn't budge!! Hey ho there is always another day!! 
_________________

Dyane 12 1976 (ish)
If you don't play the game, don't make the fecking rules..
|
June 21st, 2014, 8:03 pm |
|
 |
Matt_S
Firing on two.
Joined: July 28th, 2010, 11:50 pm Posts: 590 Location: Northumberland
|
 Re: LGY 275P Rises Again!
I'm almost about to list it on eBay, Managed to get engine parted from gearbox and rest on front of chassis, put the correct release arm spring that joolz kindly gave me, bolted back together and still the drive/driveshafts r locked up solid!!!! Started to loosen the 4 engine/gearbox off yet again and slowly the driveshafts started to move again but with the background of an awful metal on metal noise!!!!! Sounds like the pressure plate is rubbing on the inside of the bell housing, but why the hell is it doing that?? Gearbox is a standard 4 speed out of a GS and the clutch was supplied by rob at chevronics The whole set up has been fine with the old 1220cc in, then I put this 1299cc I got from Paul aka nelsthebass and suddenly another fucking problem!!!!! I've hopefully attached a couple of pictures, I know is hard to see when not in the flesh but to those in the know does anything look wrong???? Sorry pics ain't great!!!
_________________

Dyane 12 1976 (ish)
If you don't play the game, don't make the fecking rules..
|
June 22nd, 2014, 4:41 pm |
|
 |
Luke
Firing on two.
Joined: December 9th, 2008, 7:50 pm Posts: 662
|
 Re: LGY 275P Rises Again!
Are all G flywheels the same, or are there different thicknesses?
|
June 23rd, 2014, 4:18 pm |
|
 |
AZS
Firing on two.
Joined: December 22nd, 2013, 5:01 am Posts: 300 Location: Netherlands
|
 Re: LGY 275P Rises Again!
Gearbox input shaft looks to be cut off.
|
June 23rd, 2014, 5:50 pm |
|
 |
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm Posts: 2247 Location: Near Monmouth
|
 Re: LGY 275P Rises Again!
GS Bellhousing? Attachment:
DSC00022.jpg [ 236.92 KiB | Viewed 17443 times ]
|
June 23rd, 2014, 6:21 pm |
|
 |
Matt_S
Firing on two.
Joined: July 28th, 2010, 11:50 pm Posts: 590 Location: Northumberland
|
 Re: LGY 275P Rises Again!
Have I got an ami box not a gs one???
_________________

Dyane 12 1976 (ish)
If you don't play the game, don't make the fecking rules..
|
June 23rd, 2014, 7:50 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 15 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|