Looks like the boys here want to try out 12 spark

so put me down for another one!
pony

@ pony no problem you are next in que, Rick Pembro wants also 2 of them.....
I hope to have 5 of them ready within a week or 2 or 3..... then I can start to deliver.....

@ Jameswallace...
I'm not an Iphoneman, I'm an Android guy, so bluetooth +android tablet would be fine.....
but I can't programm that (yet) so will take a year of 2 from now I geuss.....


@ chrisW + Harley
You can change the password, (don't know how yet but you can)
but I only tune at home not in the WM que at Polen (next WM meeting)....

At the moment I'm implementing a temp sensor so at a hot engine the timing can be retarded and at a cold
engine it can be advanced.. ofcours all will be tunable by a table...

Hi Geo
Any news on Visa 1-2-spark?
Boggy

Sorry not at the moment, I've made several attempst to make it work but it all failes so far, costs me about 4 chips and 4 or 5 amplefyers.....sofar

So at the moment concentrating at tempsensor... however when I ordered the blue tooth dongle I've ordered 2 professional boards with those amplefyers (set me back another 60 euro) so at the moment I'm to scaired to test them, because I don't want to blow them up too.... but some day it will work...... youre the first to know...

Hi Geo,

You wrote that with the LS2 coils if the ignition is left on it will drain the battery.
Is there a possibility to have power to the coils cut afrer a set time? Like the 123 ignition does if the key is left on?

Harley

No, sorry not at the moment, I'.m now bussy implementing the tempsensor, then I'm going to make it usable for a Visa engine, maybee after that I will, when theres still space enough at the chip, I'm now at 94 % not even finished the tempsensor table.....

Just start to use this one and over a while I will send you a new chip......

I have to make priorities here sorry...

No worries Geo
Take your time and get it right, reliability is the key to any good product
Cheers
Boggy

Not at the moment is the perfect response, no rush here just want to support the cause.
The temp sensor mod you are doing is the way forward for sure!

Luv your work.

Harley

Have to say love your work too. But still think if your could find the right anti knock sensor,weld a nut on the barrel and fix it maybe fine tune will lap top so your system could run max advance up to just below the pinking zone Then what ever the revs,load or temperature no more pinking and presumably maximum economy

Believe me I'm working on it (for about 2 years now)

You need to tune as best as you can and just for the last finetuning a knocksensor comes in...

Knocksensor I have already (2 pieces BMW 1200GS) complete with an engine

Theres already a good place (at the underside of the barrel where the coolingplate is mounted at the middle of the barrel with the M7 bolt.......

If you buy 1 of these http://www.phormula.co.uk/knockmonitor-ks-4.aspx

and give it to me I will make it happen (within half a year).....


But with the tempsensor and 3 tableswitch you Almost don't need it promised...