International2cvFriends.com - View topic

Page 42 of 88

[ 880 posts ]

Go to page Previous 1 ... 39, 40, 41, 42, 43, 44, 45 ... 88 Next

1-2-spark

Author	Message
J-dub Aircooled Idiot Joined: April 24th, 2010, 10:01 am Posts: 5733 Location: Location Location	Re: 1-2-spark Planned to fit 1-2 spark to the 2cv yesterday but didnt forany reasons In order to get to te 2cv it meant a 1.3mile cycle ride So i loaded a freshly charged battery into the basket of mums bike,y spare flywheel to practice on in the pania along with my lunch Cycled to my truck, wound rear window down to get tools, loaded tools in the basket, window wouldnt wind back up. Un loaded push bike, an had to take truck to work. Window wound up fine after 10 mins driving Doh. 1-2 to come next week!! _________________ 1988 2cv 652cc 1993 Toyota Hilux Surf 3000cc runs on Bio Diesel 2004 Toyota Landcruiser Amazon 4200cc runs on Bio Diesel 1998 Daihatsu Hijet 1300cc 2005 Susuki Bandit 650cc
June 14th, 2013, 6:50 pm

lpgo Firing on 1-2 Spark Joined: November 8th, 2009, 5:42 pm Posts: 2847 Location: NL	Re: 1-2-spark Jameswallace wrote: Planned to fit 1-2 spark to the 2cv yesterday but didnt forany reasons 1-2 to come next week!! Can't wait.... _________________ Russell wrote: Hi Geo, you've been one of the sites biggest attractions in recent years. Russ
June 14th, 2013, 8:38 pm

lpgo Firing on 1-2 Spark Joined: November 8th, 2009, 5:42 pm Posts: 2847 Location: NL	Re: 1-2-spark does TWINSPARK 1-2-Spark does twinspark..... Couldn't wait had to test it this evening..... Took 2 2cv coils and put them in my 2cv. 1 coil to the left plug and the other coil to the right plug. The 2 other leads to my aloy testplate with also 2 plugs... Heres a drawing of it Attachment: schema twinspark.jpg So guess what......... it runs very well Heres the video of today.... https://www.youtube.com/watch?v=914TS6Wy2EA So now you can run: 1 2cv coil 2 plugs 2 coils 1 plug each 2 2cv coils twinspark 4 coils coil on cop all in wasted spark (at the moment) I'm running out of memory again so I don't know if sequential is possible........ You do not have the required permissions to view the files attached to this post. _________________ Russell wrote: Hi Geo, you've been one of the sites biggest attractions in recent years. Russ
June 14th, 2013, 11:01 pm

J-dub Aircooled Idiot Joined: April 24th, 2010, 10:01 am Posts: 5733 Location: Location Location	Re: 1-2-spark lpgo wrote: Jameswallace wrote: Planned to fit 1-2 spark to the 2cv yesterday but didnt forany reasons 1-2 to come next week!! Can't wait.... Provided i can have a cockup free day itll o in thursday!! _________________ 1988 2cv 652cc 1993 Toyota Hilux Surf 3000cc runs on Bio Diesel 2004 Toyota Landcruiser Amazon 4200cc runs on Bio Diesel 1998 Daihatsu Hijet 1300cc 2005 Susuki Bandit 650cc
June 14th, 2013, 11:09 pm

djjr1982 Joined: April 19th, 2013, 12:28 pm Posts: 28	Re: 1-2-spark lpgo wrote: @djjr1982 leading edge is inderdaad de voorkant (de kant die het eerste bij de sensor is deze moer recht zijn achterkant maakt niets uit.... @Chris and djjr and all other 1-2-spark drivers... Theres going to be a 1-2-spark dynoday at 18 october 2013, time from 10.am till..... so please contact me if you want to join. It will be around 75 euro for a car (about 1 hour run) maybee less, strapping it up takes about 15 minits.... so theoreticly 3/4 of an hour tuning It is held here.... http://www.tuningfactory.nl/ I be there _________________ 2cv6,5
June 15th, 2013, 12:11 am

Harley Firing on two. Joined: May 3rd, 2009, 11:40 am Posts: 816 Location: Melbourne, Australia.	Re: 1-2-spark You legend Geo! I think I need to send you some Ls1 coils to test the 1-2-spark with.... what do you think? I'll check out euro eBay or send you the ones I already have, that way it can be tested for sure. Nice work. Harley _________________ samfieldhouse wrote: It is M9 for the shocks yes, the rest I'll check when next i'm underneath her. Ironically, this will be valentines day.
June 15th, 2013, 8:50 pm

lpgo Firing on 1-2 Spark Joined: November 8th, 2009, 5:42 pm Posts: 2847 Location: NL	Re: 1-2-spark Harley wrote: You legend Geo! I think I need to send you some Ls1 coils to test the 1-2-spark with.... what do you think? I'll check out euro eBay or send you the ones I already have, that way it can be tested for sure. Nice work. Harley I'm pretty sure it will work... but I found this here in Holland.... http://www.jfetech.nl/epages/080402.sf/en_GB/?ObjectPath=/Shops/080402/Products/LS2-Coil%2BConn Is it a good price???? _________________ Russell wrote: Hi Geo, you've been one of the sites biggest attractions in recent years. Russ
June 15th, 2013, 11:06 pm

djjr1982 Joined: April 19th, 2013, 12:28 pm Posts: 28	Re: 1-2-spark I fit a new pickup with 1 bold. I use Locktite to secure the bold. Ignition is running well now. _________________ 2cv6,5
June 15th, 2013, 11:20 pm

J-dub Aircooled Idiot Joined: April 24th, 2010, 10:01 am Posts: 5733 Location: Location Location	Re: 1-2-spark djjr1982 wrote: I fit a new pickup with 1 bold. I use Locktite to secure the bold. Ignition is running well now. Did you drill and simy tap? How come the leadig edge is folded up ? _________________ 1988 2cv 652cc 1993 Toyota Hilux Surf 3000cc runs on Bio Diesel 2004 Toyota Landcruiser Amazon 4200cc runs on Bio Diesel 1998 Daihatsu Hijet 1300cc 2005 Susuki Bandit 650cc
June 16th, 2013, 5:16 pm

djjr1982 Joined: April 19th, 2013, 12:28 pm Posts: 28	Re: 1-2-spark i drill a hole 2,5mm then i cut screw-thread M3. The bold is a normal hex bold. Not recessed i have used locktide and a lock washer. What do you mean with folded up? The pickup is not perfect square but not folded up. The pickup is 1.5mm thick and is to stif to bend or somthing. I have round up the corners a little. Now i know it works great i go balans the flywheel. I calculate it need to holes 4mm wide and 2cm deep. _________________ 2cv6,5
June 16th, 2013, 10:06 pm
Display posts from previous: Sort by

Page 42 of 88

[ 880 posts ]

Go to page Previous 1 ... 39, 40, 41, 42, 43, 44, 45 ... 88 Next

1-2-spark

Who is online