hi everyone.
trying to fit an aftermarket H style towbar on the D*lly but having an SLC chassis there are no holes to fit it. where and how far from the end should I fit the tow bar/drill the holes? Russ do you have one on your Slamboo?

cheers

TIM

Tim,
offer the assembled tow bar up to the underside of the rear legs, so that the rearmost crossbar is about 10mm in front of the bumper hangers.
Clamp it in place with mole grips, square it up, then deploy the drill with an 10mm bit fitted.
Watch out for hot swarf finding its way up your sleeve, btw...

ken.

thank ken, so it really is as simple as first thought. the hardest bit will be finding a drill bit thats not blunt!

cheers

TIM