wot's the thread size for the gear knob please???
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| gear knob???? http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=820 |
Page 1 of 2 |
| Author: | hjbharry [ September 8th, 2009, 7:34 pm ] |
| Post subject: | gear knob???? |
wot's the thread size for the gear knob please???
|
|
| Author: | Neil [ September 8th, 2009, 7:39 pm ] |
| Post subject: | Re: gear knob???? |
pretty sure it's M10 |
|
| Author: | hjbharry [ September 8th, 2009, 7:42 pm ] |
| Post subject: | Re: gear knob???? |
Really thats wot i thought but it don't seem to fit 
|
|
| Author: | Sean [ September 8th, 2009, 8:32 pm ] |
| Post subject: | Re: gear knob???? |
again one of Citroens unusual, M9? |
|
| Author: | Neil [ September 8th, 2009, 8:33 pm ] |
| Post subject: | Re: gear knob???? |
i knew i'd get it wrong!! 
|
|
| Author: | Russell [ September 8th, 2009, 8:53 pm ] |
| Post subject: | Re: gear knob???? |
M9x....? |
|
| Author: | hjbharry [ September 8th, 2009, 9:37 pm ] |
| Post subject: | Re: gear knob???? |
is it M9x1.5?? |
|
| Author: | Russell [ September 8th, 2009, 9:40 pm ] |
| Post subject: | Re: gear knob???? |
I think it is. |
|
| Author: | spanners [ September 8th, 2009, 9:42 pm ] |
| Post subject: | Re: gear knob???? |
Hmmmm, when I originally lengthened my gear lever on the racer, I screwed the gearknob straight onto an M10 bolt...... 
|
|
| Author: | Neil [ September 8th, 2009, 9:47 pm ] |
| Post subject: | Re: gear knob???? |
spanners wrote: Hmmmm, when I originally lengthened my gear lever on the racer, I screwed the gearknob straight onto an M10 bolt...... i picked up an M10 stud & offered it up against the threaded end of the gearstick - looked identical, thread appeared to be bang on. tried a M10 nut on both the stud (to make sure) & the stick & it seemed ok.
|
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|