International2cvFriends.com
http://www.international2cvfriends.com/forum/

Caliper.....
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6448
Page 1 of 1

Author:  48pop [ March 8th, 2023, 10:06 pm ]
Post subject:  Caliper.....

Caliper rebuild tomorrow......wish me luck :)

Author:  Roger V [ March 8th, 2023, 11:22 pm ]
Post subject:  Re: Caliper.....

Good luck :)

Just the one?

If you can't fix the brakes, make the horn louder :)

Author:  AZL57 [ March 13th, 2023, 7:13 pm ]
Post subject:  Re: Caliper.....

Not a big problem if the inside isn't to corroded. I hate brake fluid on my hands. When i took the 57 apart for restauration the rear calipers and brake shoes were so stuck corroded that i had to hammer the shoes open and then the calipers. They were hammered apart with a drift. Cleaned all with wire wool, new cups and they functioned an other 20 years.

Author:  48pop [ April 6th, 2023, 9:54 am ]
Post subject:  Re: Caliper.....

Job done,eventually.....
Top seal on the piston was fractionally too large an had to be forced in to the slot...... supplier said they were having issues with supply....still selling the troublesome seals though.

Still , brakes now fine

Author:  48pop [ May 5th, 2023, 10:07 pm ]
Post subject:  Re: Caliper.....

Wee car away to a new home in Northern Ireland........I decided to keep my AZU250 :)

Page 1 of 1 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/