International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
Visa Engine & 2CV Gearbox http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6421 |
Page 2 of 2 |
Author: | Roger V [ December 22nd, 2022, 11:23 am ] |
Post subject: | Re: Visa Engine & 2CV Gearbox |
Thanks Kit I like the oven/freezer bit Must get off my ass and do something with this project |
Author: | Edce [ December 25th, 2022, 11:25 am ] |
Post subject: | Re: Visa Engine & 2CV Gearbox |
I have also a Visa flywheel now fitted with a 2CV starter ring, placed 5mm from the gearbox side. |
Author: | Roger V [ December 26th, 2022, 6:49 pm ] |
Post subject: | Re: Visa Engine & 2CV Gearbox |
Thanks @Edce Anyone know if a Visa bellhousing will bolt onto a 2cv gearbox? I have a 5 speed gsa gearbox with a visa bell housing all ready attached. I have a visa engine and flywheel, and what is probably a visa starter motor. So, if it fit, and a bit of swapping around .... I'm working on ignition |
Author: | jasu [ December 26th, 2022, 6:55 pm ] |
Post subject: | Re: Visa Engine & 2CV Gearbox |
No, it don't fit. On Visa/GS bellhousing, the mounting surface is flat, and 2CV bellhousing has "half bearing caps" of differential... |
Author: | Roger V [ December 26th, 2022, 7:09 pm ] |
Post subject: | Re: Visa Engine & 2CV Gearbox |
Thanks @Jasu That does sound familier, now that you mention it. Edit Obvious really, or everyone would be doing that |
Page 2 of 2 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |