International2cvFriends.com
http://www.international2cvfriends.com/forum/

Visa Engine & 2CV Gearbox
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6421		 Page 2 of 2
Author:  Roger V [ December 22nd, 2022, 11:23 am ]
Post subject:  Re: Visa Engine & 2CV Gearbox
Thanks Kit :)

I like the oven/freezer bit :D

Must get off my ass and do something with this project :D
Author:  Edce [ December 25th, 2022, 11:25 am ]
Post subject:  Re: Visa Engine & 2CV Gearbox
I have also a Visa flywheel now fitted with a 2CV starter ring, placed 5mm from the gearbox side.
Author:  Roger V [ December 26th, 2022, 6:49 pm ]
Post subject:  Re: Visa Engine & 2CV Gearbox
Thanks @Edce :)

Anyone know if a Visa bellhousing will bolt onto a 2cv gearbox?

I have a 5 speed gsa gearbox with a visa bell housing all ready attached.
I have a visa engine and flywheel, and what is probably a visa starter motor.

So, if it fit, and a bit of swapping around .... I'm working on ignition :)
Author:  jasu [ December 26th, 2022, 6:55 pm ]
Post subject:  Re: Visa Engine & 2CV Gearbox
No, it don't fit. On Visa/GS bellhousing, the mounting surface is flat, and 2CV bellhousing has "half bearing caps" of differential...
Author:  Roger V [ December 26th, 2022, 7:09 pm ]
Post subject:  Re: Visa Engine & 2CV Gearbox
Thanks @Jasu

That does sound familier, now that you mention it. :)

Edit

Obvious really, or everyone would be doing that :D
Page 2 of 2 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/