International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
Oil pipe on the cylinder heads. http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6417 |
Page 1 of 1 |
Author: | subarupete [ May 29th, 2022, 2:32 pm ] |
Post subject: | Oil pipe on the cylinder heads. |
It seems Bonaparts now longer trade? Has anybody a solution for flexible pipes for the cylinder head feeds? Cheers Peter |
Author: | Roger V [ May 31st, 2022, 7:49 pm ] |
Post subject: | Re: Oil pipe on the cylinder heads. |
i did think of doing that if/when i add a turbo. Had no idea where to look for them. I would imagine some sort of hydraulic pipe making company! |
Author: | Jonathan [ June 1st, 2022, 12:03 am ] |
Post subject: | Re: Oil pipe on the cylinder heads. |
Think you mean this... https://ecas2cvparts.co.uk/collections/ ... heads-2cv6 And this... https://ecas2cvparts.co.uk/collections/ ... feed-00800 |
Author: | subarupete [ June 1st, 2022, 10:20 am ] |
Post subject: | Re: Oil pipe on the cylinder heads. |
Hi, Jonathan, Yes those bits, but in flexible versions, for Off-Road or Raid. Cheers Peter |
Author: | Roger V [ June 1st, 2022, 11:10 am ] |
Post subject: | Re: Oil pipe on the cylinder heads. |
I suspect the tricky bit is finding the M7 banjo to fit onto pipe. Could M6 be drilled out? 90 psi and oil proof flexible pipe as well. Not forgetting, optional take off for turbo oil feed of course |
Author: | Roger V [ June 1st, 2022, 11:21 am ] |
Post subject: | Re: Oil pipe on the cylinder heads. |
perhaps tap out to M8 and then M8 bolts an banjos should be easy to find |
Author: | subarupete [ June 2nd, 2022, 1:18 pm ] |
Post subject: | Re: Oil pipe on the cylinder heads. |
fyi https://www.citroenspecialsclub.org/for ... 52ccd03963 |
Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |