I'm looking to fit an ARB I bought, to the Shed
Any Tips
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Anti Roll Bar -Sway Bar (ARB) http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6404 |
Page 1 of 1 |
| Author: | Roger V [ January 23rd, 2022, 11:42 pm ] |
| Post subject: | Anti Roll Bar -Sway Bar (ARB) |
I'm looking to fit an ARB I bought, to the Shed Any Tips
|
|
| Author: | AZL57 [ February 3rd, 2022, 7:08 pm ] |
| Post subject: | Re: Anti Roll Bar -Sway Bar (ARB) |
That from an ami8? |
|
| Author: | Roger V [ February 3rd, 2022, 8:34 pm ] |
| Post subject: | Re: Anti Roll Bar -Sway Bar (ARB) |
I believe it is. I have the bar and clips from one source (Pete Sparrow), but it did not have the endplates. From Simon Sobey, I have obtained one end plate with the spacer already welded on and threaded. He also supplied a 'blank' endplate for the other end. So far, I have cut, drilled and tapped some 10mm steel for the blank plate. In the next few days I hope to visit my friend up the road to weld it up as he has professional welding equipment, and would like a laugh at my attempts.  Yesterday, new shock absorbers arrived from Ecas, So I thought it best to fit it all together as the exhaust probably needs to be moved out of the way. I have looked at it a few times wondering how to get the bar in place, and think perhaps I need to support the gearbox and remove the rear gearbox mount. Any thoughts are welcome 
|
|
| Author: | Roger V [ February 8th, 2022, 10:32 pm ] |
| Post subject: | Re: Anti Roll Bar -Sway Bar (ARB) |
welding is done
|
|
| Author: | chevrons2 [ February 10th, 2022, 1:48 am ] |
| Post subject: | Re: Anti Roll Bar -Sway Bar (ARB) |
Roger V wrote: .....obtained one end plate ....... also a 'blank' endplate .....new shock absorbers ..... I assume you checked that the end-plates both have the same size mounting studs for the shock absorbers: (12mm on 2cv, AZU, Dyane, Mehari. 14mm on Ami, AK, Acadiane). |
|
| Author: | Roger V [ February 15th, 2022, 9:57 pm ] |
| Post subject: | Re: Anti Roll Bar -Sway Bar (ARB) |
I did thanks. Didn't occur to me, But Simon checked
|
|
| Author: | chevrons2 [ February 16th, 2022, 11:30 am ] |
| Post subject: | Re: Anti Roll Bar -Sway Bar (ARB) |
Roger V wrote: I did thanks. Didn't occur to me, But Simon checked The benefit of buying parts from someone who knows his stuff. 
|
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|