International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
We have liftoff.....AZU 250 rebuild thread http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6302 |
Page 10 of 19 |
Author: | rob massey55 [ July 13th, 2020, 8:23 pm ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Good stuff! Denso tape for a smooth outcome and long life . |
Author: | 48pop [ July 26th, 2020, 10:49 pm ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Sooo...quick look at brakes, my 44mm socket would not fit, needed wall turned down. Not having a lathe, this was achieved with a grinder...... Brakes were a total rusty mess with separated friction material...Van has covered 600miles since last MOT......All new bits ordered including a new adjuster. And a wee repair Was on Hols this week and back travelling (work) this week |
Author: | 48pop [ August 8th, 2020, 10:24 pm ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Some progress..... |
Author: | Roger V [ August 8th, 2020, 10:31 pm ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Looking very nice. |
Author: | Edce [ August 9th, 2020, 8:29 am ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Great work ! |
Author: | EirikJ [ August 9th, 2020, 6:13 pm ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
And quite quickly too! Looking good. |
Author: | 48pop [ August 9th, 2020, 8:01 pm ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Does not look much different....but headlight, heat exchangers, exhaust all back on..... old, 2 pedal assembly extracted and new 3 pedal assembly installed. new accelerator cable ordered. Existing choke cable seems to be about 25mm short, ( i assume due to different carb arrngement between 435 and 602.. Spent many happy hours searching for small bits I removed months ago. Handbrake wingnuts for adjustment......spent hours looking for them....and the bumpstops, spent days looking in every corner before I found them....already on the chassis !! |
Author: | Geert [ August 10th, 2020, 7:10 am ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
48pop wrote: Spent many happy hours searching for small bits I removed months ago. Handbrake wingnuts for adjustment......spent hours looking for them....and the bumpstops, spent days looking in every corner before I found them....already on the chassis !! |
Author: | 48pop [ August 15th, 2020, 8:45 am ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Some progress yesterday.... Been looking at the wiring, of course I didn't take any pics when dismantling, and I can't find a wiring diagram that looks anything like mine.... Anyway, managed to work out the coil wiring, soooooooo.....why not throw in some fuel and see what happens ! Found a small funnel and stuck it in the fuel pipe, poured in some petrol I found in a can, (no idea how long its been there....). Next, find the key I put "somewhere safe" nearly a year ago! Located the key, switched it on, and hit the start button. It cranked and immediately coughed.....Promising ! A little more cranking, some fuel directly down the carb and it fired up , even idled ok after a while .... Happy days !! |
Author: | Roger V [ August 15th, 2020, 9:49 am ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Yay,always a nice moment. |
Page 10 of 19 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |