International2cvFriends.com
http://www.international2cvfriends.com/forum/

We have liftoff.....AZU 250 rebuild thread
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6302
Page 8 of 19

Author:  48pop [ May 12th, 2020, 11:03 am ]
Post subject:  Re: We have liftoff.....

yep, that was my decision ..... L shaped bracket, drill one hole, job done !

:lol: :lol:

Author:  48pop [ May 19th, 2020, 5:45 pm ]
Post subject:  Re: We have liftoff.....

Dagmars ??

Painted shells, got lots of runs, will be redoing !

Image

Author:  Roger V [ May 19th, 2020, 7:24 pm ]
Post subject:  Re: We have liftoff.....

Thats a nice colour :)

Author:  48pop [ June 1st, 2020, 12:59 pm ]
Post subject:  Re: We have liftoff.....

This is the Van that keeps giving ! Another 5 centimes to the rebuild fund :D :D

Image

Author:  48pop [ June 7th, 2020, 11:14 pm ]
Post subject:  Re: We have liftoff.....

Just checking.....

Front drums, is it utterly impossible to get the "3 way to drum" brake pipe fitted when the slave cylinder is fitted?

Another question, is it only possible to to assemble the front brakes if you have 3 arms?

I've got a Dyane box here and there is plenty of space between the gearbox casing and backplate but on the 602 box.....its very tight !

Author:  Geert [ June 8th, 2020, 8:19 am ]
Post subject:  Re: We have liftoff.....

48pop wrote:
Just checking.....

Front drums, is it utterly impossible to get the "3 way to drum" brake pipe fitted when the slave cylinder is fitted?


It is possible, I have done it once, but it is not advisable. You need very thin fingers and a lot of patience.
What I can advise is:
Adjust the brake shoe adjustment lugs so that the cylinder is exposed, so you can easily remove the cylinder and leave the brake shoes. After mounting the cylinders you can adjust the brake shoes again.
Piece of cake. ;)
Quote:
Another question, is it only possible to to assemble the front brakes if you have 3 arms?

No, two good arms will do.One left and one right . 8-)

Author:  AZL57 [ June 9th, 2020, 6:14 pm ]
Post subject:  Re: We have liftoff.....

It helps if you have an pet octopus ;-)

Author:  48pop [ June 14th, 2020, 11:53 pm ]
Post subject:  Re: We have liftoff.....

Some more small tasks complete...

Originals media blasted, primered and sprayed.....
Image

Headlamp bar Shortened, blasted and painted
Image

Author:  AZL57 [ June 15th, 2020, 8:05 pm ]
Post subject:  Re: We have liftoff.....

Looks great.

Author:  Edce [ June 15th, 2020, 8:41 pm ]
Post subject:  Re: We have liftoff.....

Headlamp bracket shortened ? What was the reason and where did you shorten it ? Thnks

Page 8 of 19 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/