International2cvFriends.com
http://www.international2cvfriends.com/forum/

We have liftoff.....AZU 250 rebuild thread
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6302
Page 16 of 19

Author:  Roger V [ October 7th, 2020, 3:00 pm ]
Post subject:  Re: We have liftoff.....AZU 250 rebuild thread

Check you have 12v at the actual head/side lights. If you have, then it must be a ground issue.

Author:  48pop [ October 7th, 2020, 4:36 pm ]
Post subject:  Re: We have liftoff.....AZU 250 rebuild thread

will check tonight......but odd that horn is still working :?

Author:  subarupete [ October 7th, 2020, 4:48 pm ]
Post subject:  Re: We have liftoff.....AZU 250 rebuild thread

Horn is earthed via fixing nut?

Author:  48pop [ October 7th, 2020, 10:20 pm ]
Post subject:  Re: We have liftoff.....AZU 250 rebuild thread

Just been back out to garage.......All sorted happy days :)

Battery tray was out for access to back of speedo. to get it out I had loosened the vent....which also included the earth.....EEJIT !

Image

Author:  Geert [ October 8th, 2020, 7:34 am ]
Post subject:  Re: We have liftoff.....AZU 250 rebuild thread

:idea:

Author:  48pop [ November 7th, 2020, 8:07 pm ]
Post subject:  Re: We have liftoff.....AZU 250 rebuild thread

Been a while !

dash all back in an nearly finished wiring.......Got my steering wheel cap done today.

Started with a rough cut from some scrap 10mm plate.

Image

Tickle with the grinder and add something for lathe mounting

Image

My mates dad then added a step to fit boss using his 60yr old churchhill lathe. Then then I mounted in my drill, and added some shape with a 40grit flapwheel in the grinder...

Image
Image
Image

Author:  subarupete [ November 7th, 2020, 8:22 pm ]
Post subject:  Re: We have liftoff.....AZU 250 rebuild thread

Good results, like it.

Author:  Geert [ November 8th, 2020, 9:34 am ]
Post subject:  Re: We have liftoff.....AZU 250 rebuild thread

:) nice

Author:  48pop [ November 21st, 2020, 11:12 pm ]
Post subject:  Non stopping wipers !

Hi folks, got caught in the rain today, wipers started fine, but.......even without switch, they wouldnt stop......

I swapped the dash recently, so assumed I'd got the switch wiring wrong , so I disconnected it,,,,,and they still wiped !

Found a few threads on here but I'm still unclear what i need to do !! Is there an easy guide ??????

(its the older, cheese grater type....)

Cheers !

Gerry

Author:  Roger V [ November 21st, 2020, 11:52 pm ]
Post subject:  Re: We have liftoff.....AZU 250 rebuild thread

Is it one that parks? Or would you expect it to just stop where ever you turned it off?

Page 16 of 19 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/