International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
We have liftoff.....AZU 250 rebuild thread http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6302 |
Page 16 of 19 |
Author: | Roger V [ October 7th, 2020, 3:00 pm ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Check you have 12v at the actual head/side lights. If you have, then it must be a ground issue. |
Author: | 48pop [ October 7th, 2020, 4:36 pm ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
will check tonight......but odd that horn is still working |
Author: | subarupete [ October 7th, 2020, 4:48 pm ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Horn is earthed via fixing nut? |
Author: | 48pop [ October 7th, 2020, 10:20 pm ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Just been back out to garage.......All sorted happy days Battery tray was out for access to back of speedo. to get it out I had loosened the vent....which also included the earth.....EEJIT ! |
Author: | Geert [ October 8th, 2020, 7:34 am ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Author: | 48pop [ November 7th, 2020, 8:07 pm ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Been a while ! dash all back in an nearly finished wiring.......Got my steering wheel cap done today. Started with a rough cut from some scrap 10mm plate. Tickle with the grinder and add something for lathe mounting My mates dad then added a step to fit boss using his 60yr old churchhill lathe. Then then I mounted in my drill, and added some shape with a 40grit flapwheel in the grinder... |
Author: | subarupete [ November 7th, 2020, 8:22 pm ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Good results, like it. |
Author: | Geert [ November 8th, 2020, 9:34 am ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
nice |
Author: | 48pop [ November 21st, 2020, 11:12 pm ] |
Post subject: | Non stopping wipers ! |
Hi folks, got caught in the rain today, wipers started fine, but.......even without switch, they wouldnt stop...... I swapped the dash recently, so assumed I'd got the switch wiring wrong , so I disconnected it,,,,,and they still wiped ! Found a few threads on here but I'm still unclear what i need to do !! Is there an easy guide ?????? (its the older, cheese grater type....) Cheers ! Gerry |
Author: | Roger V [ November 21st, 2020, 11:52 pm ] |
Post subject: | Re: We have liftoff.....AZU 250 rebuild thread |
Is it one that parks? Or would you expect it to just stop where ever you turned it off? |
Page 16 of 19 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |