International2cvFriends.com
http://www.international2cvfriends.com/forum/

We have liftoff.....AZU 250 rebuild thread
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6302
Page 1 of 19

Author:  48pop [ March 16th, 2020, 3:50 pm ]
Post subject:  We have liftoff.....AZU 250 rebuild thread

my Sunday........

New Chassis from Ken in a few weeks so I thought I'd better get busy.

Underside of body is remarkably good, Floors replaced when it came over last April but the rest has some brittle coating on it.....when chipped away, I'm seeing original paint, (apart from rearmost crossmember which is a bit crusty, both rear corners have had a wee whack at somepoint)

Author:  Roger V [ March 16th, 2020, 4:43 pm ]
Post subject:  Re: We have liftoff.....

You may want to consider creating (unless you have one already) a topic about your vehicle, rather than bits everywhere regarding the same project. Its much easier for someone to follow the progress. :)

Author:  EirikJ [ March 18th, 2020, 12:40 am ]
Post subject:  Re: We have liftoff.....

Yess! Project threads are the best!

Author:  Geert [ March 18th, 2020, 9:10 am ]
Post subject:  Re: We have liftoff.....

˝We have a liftoff.... ˝
is a good title for this project.
So I would not start any other topic about it. :)

Keep on posting please.

Author:  48pop [ March 18th, 2020, 1:02 pm ]
Post subject:  Re: We have liftoff.....

OK, ill keep it here, don't expect anything to happen quickly though !

Author:  lpgo [ March 18th, 2020, 9:01 pm ]
Post subject:  Re: We have liftoff.....

What is wrong with this chassis??? Looks good to me???

Author:  48pop [ March 19th, 2020, 12:51 pm ]
Post subject:  Re: We have liftoff.....

In truth, its not too bad.....Top plate is perforated, handbrake crossmember, some holes in the bottom plate and front chassis legs.

Its all fixable and thats what I'll be doing...eventually, but I also like the thought of a fit and forget. Would have needed body off for proper repair anyway, so i thought, i'm in this far anyway.....why not..

Author:  lpgo [ March 19th, 2020, 1:24 pm ]
Post subject:  Re: We have liftoff.....

I totaly agree with that.. I like to forget too. I think with Ken,s chassis that will be the case for sure... Please keep on posting..

Author:  48pop [ March 19th, 2020, 5:35 pm ]
Post subject:  Re: We have liftoff.....

Where are you located in NL?
For some bizzare reason, although I live in Scotland, I've ended up working for Dutch companies for past 20yrs....Currently a company with HQ in Woerden.

Author:  lpgo [ March 19th, 2020, 7:06 pm ]
Post subject:  Re: We have liftoff.....

Kerkrade

Page 1 of 19 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/