Not much original anymore...2 airfilters on top of each other.
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| 425 TUNING and 6V to 12V alternator http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6292 |
Page 2 of 2 |
| Author: | AZL57 [ February 27th, 2020, 5:07 pm ] |
| Post subject: | Re: 425 TUNING and 6V to 12V alternator |
Not much original anymore...2 airfilters on top of each other.
|
|
| Author: | Geert [ February 27th, 2020, 8:13 pm ] |
| Post subject: | Re: 425 TUNING and 6V to 12V alternator |
samfieldhouse wrote: Pics of the German 425, sounded lovely:  German ? since when is Florida German ? I know Angela Merkel is head of state in Europe, but in The States? Donald will not allow that to happen. |
|
| Author: | AZL57 [ February 27th, 2020, 9:54 pm ] |
| Post subject: | Re: 425 TUNING and 6V to 12V alternator |
it's a grey area it says so... |
|
| Author: | EirikJ [ February 27th, 2020, 10:13 pm ] |
| Post subject: | Re: 425 TUNING and 6V to 12V alternator |
AZL57 wrote: it's a grey area it says so...  Quote: I did once put a 12 volt alternator on a 425, it is very easy. Weld a u profil to the manifold put the alternator on it mount a 2cv6 fan, bin the dynamo and your done.. And in the prosess I will ruin the look I'm after The problem is not how to get 12 V, it's how to get 12V still using the crank mounted altenator-dynamo-generator thing. To keep the clean, minimalist look of the engine and bay.I have found a workshop which has been repairing dynamos, generators and starters for 60 years. The first guy working there is still around! I'll check with them if they can convert the original 6V to 12V. It's jut about winding new wires and changing a few diodes, isnt it? Maybe just the diodes? (I dont know the English words for this type of job, but in Norwegian it's called "Vikleverksted". Which directly translated is winding workshop )Nice pictures by the way, thanks! I didn't like the exhaust at all, or the wiring and relays, but hey.... |
|
| Author: | AZL57 [ February 28th, 2020, 12:24 am ] |
| Post subject: | Re: 425 TUNING and 6V to 12V alternator |
I have seen an video over turning an old 6 volt 2cv dynamo into 12 volts...i think but it was in portugese.... shall look if i can find that. p.s. it's a dynamo not an altenator the old beast only coils no diodes.. |
|
| Author: | AZL57 [ February 28th, 2020, 12:31 am ] |
| Post subject: | Re: 425 TUNING and 6V to 12V alternator |
found it it is spanish... https://www.youtube.com/watch?v=COrUMOOpjOA https://www.youtube.com/watch?v=HvbPQOiY5QA would they have 12volt dynamos on spanish/argentina 18 hp engines? |
|
| Page 2 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|