Thanks Pete
I've ordered one (under plug), let's see what I get.
How did you calibrate?
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Cylinder head temperature http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6287 |
Page 1 of 4 |
| Author: | Roger V [ January 28th, 2020, 12:51 pm ] |
| Post subject: | Cylinder head temperature |
Anyone know what the ideal temperature is for the 2cv engine (late 602) to run at? The Bedouin has an area under the grill that is allowing a large volume of air to over cool in winter. I need to block some off. I can purchase a cylinder head temperature (cht) sensor, but it won't mean a lot unless I have some idea of what it should be. |
|
| Author: | subarupete [ January 28th, 2020, 2:35 pm ] |
| Post subject: | Re: Cylinder head temperature |
Sensor under the plug approx 200 deg C, from memory??? In manifold see pics Attachment: Untitled.jpg Attachment: Untitled1.jpg ps With the thermocouple under the plug are very fiddly to fit. |
|
| Author: | Roger V [ January 28th, 2020, 8:07 pm ] |
| Post subject: | Re: Cylinder head temperature |
Thanks Pete I've ordered one (under plug), let's see what I get. How did you calibrate? |
|
| Author: | subarupete [ January 28th, 2020, 8:45 pm ] |
| Post subject: | Re: Cylinder head temperature |
What did you buy? |
|
| Author: | Roger V [ January 28th, 2020, 8:59 pm ] |
| Post subject: | Re: Cylinder head temperature |
Thought I would try one of these https://www.ebay.co.uk/itm/Universal-Cy ... 2171263927 |
|
| Author: | subarupete [ January 28th, 2020, 9:21 pm ] |
| Post subject: | Re: Cylinder head temperature |
Ungrounded needed you can then power the set up from the car supply. Start with this battery display https://www.ebay.co.uk/itm/TM-902C-K-Ty ... SwKeNd0geP Peter |
|
| Author: | Roger V [ January 28th, 2020, 10:46 pm ] |
| Post subject: | Re: Cylinder head temperature |
It will take few days to arrive. However, I may have ordered the wrong type.  We will see. What I think I require is a resistive type. The same as a water temperature sender would be. I'm after connecting it into my Speeduino for when I'm running on petrol. I have this whizzy Android app to monitor it when running on Speeduino.. |
|
| Author: | subarupete [ January 29th, 2020, 10:24 am ] |
| Post subject: | Re: Cylinder head temperature |
@What I think I require is a resistive type. That will be a "Thermistor" used for Oil and Water temp (max temp approx 130 deg C.) "TC's" (Thermcouple) signal gives Mille volts but can measure very high temps eg exhaust. |
|
| Author: | Roger V [ January 29th, 2020, 12:14 pm ] |
| Post subject: | Re: Cylinder head temperature |
Thanks Pete I did a little more research last night, and it needs an amplifier. Its ordered it will be interesting connecting it all up. 
|
|
| Author: | subarupete [ January 29th, 2020, 2:04 pm ] |
| Post subject: | Re: Cylinder head temperature |
Did a quick search for EGT on Speedunio but didn’t find much, what did you find re amplifier with Speeduino ? |
|
| Page 1 of 4 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|