International2cvFriends.com
http://www.international2cvfriends.com/forum/

Help needed to fit a Radioen 2CV radio
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6280		 Page 1 of 1
Author:  AZL57 [ November 29th, 2019, 7:23 pm ]
Post subject:  Help needed to fit a Radioen 2CV radio
Since 1959 all 2cv's till the 1990 ones have two slits in the dashboard parcel shelf. This to be able to fit the Radioen. A friend has an 1955 2cv and want to fit a Radioen in it. I have only have my 57 on hand here (no slits), so hence the question. Could anyone mesure the size off a slit(red) and the distance from the righthand slit to the side panel and to the front edge of the shelf (green). Just lift the cover and they are visible. Thanks in advance.
Author:  AZL57 [ December 1st, 2019, 12:04 am ]
Post subject:  Re: Help needed to fit a Radioen 2CV radio
Well nobody has a 2cv overhere? ;-)
Author:  ken [ December 1st, 2019, 12:20 am ]
Post subject:  Re: Help needed to fit a Radioen 2CV radio
Hi AZL,
any chance that these slots might exist on RHD cars?
Will have a look tomorrow; I've been out all of today in Harrogate for my grandson's birthday bash... ;)

AZL57 wrote:
Well nobody has a 2cv overhere? ;-)
Author:  rob massey55 [ December 1st, 2019, 10:30 am ]
Post subject:  Re: Help needed to fit a Radioen 2CV radio
ImageP1020778 by Robndaisy, on Flickr

My excuse, building an A series parts storage facility :lol:
Slits are 10mm. x 45mm.
from edge of parcel shelf 20mm.
from edge of A post to edge of slit 100mm.
slit centres 265mm.

really glad I lifted the cover, found all sorts of useless stuff trapped at the bottom, all soaking wet of course :)
Right, I'm off now to help the farmer put up stock fencing, have a good day ;) .
Author:  AZL57 [ December 1st, 2019, 5:13 pm ]
Post subject:  Re: Help needed to fit a Radioen 2CV radio
Super thank you for the help, we will have to mirror it, he already found an antenna.
Author:  Ianredspecial [ December 2nd, 2019, 12:48 am ]
Post subject:  Re: Help needed to fit a Radioen 2CV radio
I had no idea these existed. Thanks.
Author:  samfieldhouse [ December 6th, 2019, 6:28 pm ]
Post subject:  Re: Help needed to fit a Radioen 2CV radio
Haha I had no idea. That's a geeky fact for the bank! :geek:
Author:  AZL57 [ December 6th, 2019, 11:18 pm ]
Post subject:  Re: Help needed to fit a Radioen 2CV radio
All 2cvs even have two more evolutional marks on the fire wall. At the left a support for the 50s gear lever at the right the oval shape is were the hole for the 57 windscreen demister tube went trough.
Page 1 of 1 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/