|
|
|
Boot hinge crossmember 2CV6 Special
| Author |
Message |
|
Derek
Firing on two.
Joined: April 20th, 2017, 10:55 pm
Posts: 107
|
 Re: Boot hinge crossmember 2CV6 Special Search Ebay for M5 nuts.
Probably got some in the shed. I'll check.
|
| June 3rd, 2019, 3:20 pm |
|
|
|
hypno2cv
Joined: July 28th, 2009, 3:55 pm
Posts: 24
|
Re: Boot hinge crossmember 2CV6 Special Hi Derek, I'm referring to M5 captive nut, which fits the square aperture that the cross member fits onto, not the bog standard M5 nut.
|
| June 4th, 2019, 4:21 pm |
|
|
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm
Posts: 2846
Location: NL
|
Re: Boot hinge crossmember 2CV6 Special hypno2cv wrote: Hi Derek, I'm referring to M5 captive nut, which fits the square aperture that the cross member fits onto, not the bog standard M5 nut. Be creative.. https://www.conrad.com/p/velleman-squar ... st=product
_________________
Russell wrote: Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ
|
| June 4th, 2019, 5:47 pm |
|
|
|
AZL57
Firing on two.
Joined: October 22nd, 2014, 10:59 pm
Posts: 2006
Location: South-Limburg
|
Re: Boot hinge crossmember 2CV6 Special You could put a little metal bar behind it with a hole drilled in and tapped to m5. Like the hooks that were used to put the rear seat hammock in. https://www.2cv-shop.nl/hoedenplank/796 ... plank.html
|
| June 5th, 2019, 4:59 pm |
|
|
|
chevrons2
Firing on two.
Joined: April 9th, 2010, 12:21 am
Posts: 464
Location: West Sussex
|
Re: Boot hinge crossmember 2CV6 Special
|
| June 5th, 2019, 5:47 pm |
|
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am
Posts: 1581
Location: Exeter, Devon
|
Re: Boot hinge crossmember 2CV6 Special Try a garden centre. Or b&q. The ones they assemble greenhouses with 
_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
| June 5th, 2019, 11:57 pm |
|
|
|
Derek
Firing on two.
Joined: April 20th, 2017, 10:55 pm
Posts: 107
|
Re: Boot hinge crossmember 2CV6 Special Check the pitch of the screw thread. Some of the square nuts are quite coarse, the screw thread may be finer.
|
| June 6th, 2019, 11:45 am |
|
|
Who is online |
Users browsing this forum: No registered users and 68 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
