| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Narrow Light Bar measurement http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6089 |
Page 2 of 2 |
| Author: | chevrons2 [ February 21st, 2018, 1:31 pm ] |
| Post subject: | Re: Narrow Light Bar measurement |
chevrons2 wrote: .... From memory, I think that measurement on each side of the wide bars is something like 124mm but I'll check tomorrow and I'll check the short one on the 350 too. NB: The AK350 has similar upright supports to later cars, so the comparison is easy. This measurements on the narrow bar on my 1967 AK350 is 66mm. As the sleeve has a angled end, I have measured at the bottom, (where it is the shortest distance from the upright support and also where there normally isn't a weld). Kit: Along with the donor wide bar that I've got for you, I have just realised that I have a much earlier (ripple) light bar that I'll lend you, for comparison of the overall width. |
|
| Page 2 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|