International2cvFriends.com
http://www.international2cvfriends.com/forum/

Heater tubes
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6069
Page 1 of 1

Author:  Roger V [ November 26th, 2017, 9:00 pm ]
Post subject:  Heater tubes

My heater tube foam has pinched in the middle and is stopping air getting the through.

Any one know any improvements for heater tubes?

:)

Author:  samfieldhouse [ November 26th, 2017, 9:22 pm ]
Post subject:  Re: Heater tubes

I have neoprene hoses in mine. Fabulous, like a hurricane. Plus with the de-mister on you can check the tappets for unusual noises ;)

Some people say it's more noisy that the cardboard ones, but they're mostly fannies who need bigger speakers... and people who'd rather watch their cars burn when the cardboard inevitably falls off onto the exhaust.

https://www.demon-tweeks.co.uk/Product.do?method=view&n=1607&g=402659&p=402670&d=124&c=4&l=2&utm_source=Google&utm_medium=Base&utm_campaign=Silicone%20Ducting%20Hose&gclid=Cj0KCQiA6enQBRDUARIsAGs1YQgCnMkzULgDnEyHfpOivIRpZs8WwzVapZbuZyFR_yQPyayK_vNlfcAaAqAAEALw_wcB&gclsrc=aw.ds

Author:  Roger V [ November 26th, 2017, 11:20 pm ]
Post subject:  Re: Heater tubes

Thanks Sam
I was visiting a friend today who lives 20 miles away and I got cold on the way there. I have to say, that had the cardboard tube caught fire, I would have been reluctant to put it out!

I removed the inner foam and was surprised to find it is only glued at the ends. It is amazing how much noise the foam absorbs.

I am wondering if some chicken wire could be used to hold the tube/foam open

Author:  Derek [ November 27th, 2017, 9:07 am ]
Post subject:  Re: Heater tubes

Chicken wire will help. Wicked on the hands when fitting though. (Wife makes marionettes for window displays using same as a base). That neoprene looks promising. Maybe cut down on noise with some felt liner.

Author:  AZL57 [ November 27th, 2017, 9:23 am ]
Post subject:  Re: Heater tubes

in the old felt tubes there is a spiral from piano wire inside to keep them open.

Page 1 of 1 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/