| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Bent fuel pump pushrod removal http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6068 |
Page 1 of 1 |
| Author: | Boggy [ November 26th, 2017, 7:28 pm ] |
| Post subject: | Bent fuel pump pushrod removal |
Hi fonts of all knowledge Does anyone have a method for getting out a bent fuel pump pushrod? Rod is stuck solid, any ideas, tried grips and pulling but as I said stuck solid TIA Boggy |
|
| Author: | Roy Eastwood [ November 26th, 2017, 7:51 pm ] |
| Post subject: | Re: Bent fuel pump pushrod removal |
Dismantle, split crankcase, pull out from inside  Boggy wrote: Hi fonts of all knowledge Does anyone have a method for getting out a bent fuel pump pushrod? Rod is stuck solid, any ideas, tried grips and pulling but as I said stuck solid TIA Boggy |
|
| Author: | Derek [ November 27th, 2017, 9:02 am ] |
| Post subject: | Re: Bent fuel pump pushrod removal |
Yes, sadly this is the only way. I bent one by forgetting to fit the spacer under the pump. Damage done. Temporarily, I got round it by fitting an electric fuel pump. |
|
| Author: | Boggy [ November 27th, 2017, 9:06 am ] |
| Post subject: | Re: Bent fuel pump pushrod removal |
Hi Car came to me with electric pump, owner wanted it put back to original "Bugger" Thanks all Boggy |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|