International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
Tie rods http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=6018 |
Page 1 of 1 |
Author: | Steve H [ June 23rd, 2017, 12:11 pm ] |
Post subject: | Tie rods |
Any tips please on how to tighten nyloc nuts at steering rack end. The tapered components (can't remember what they are called, senior moment!) keep turning. |
Author: | ken [ June 23rd, 2017, 2:49 pm ] |
Post subject: | Re: Tie rods |
Easy... Use a plain nut to pull the taper into firm contact, then replace with a nyloc. Steve H wrote: Any tips please on how to tighten nyloc nuts at steering rack end. The tapered components (can't remember what they are called, senior moment!) keep turning. |
Author: | EirikJ [ June 23rd, 2017, 2:54 pm ] |
Post subject: | Re: Tie rods |
Use something handy, like a crowbar or tire iron, to push the steering rod end firmly towards the tapered components, while you tighten the nut. The friction between the cones when pushed together should be enough to stop it rotating. |
Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |