International2cvFriends.com
http://www.international2cvfriends.com/forum/

AKS Suspension gaiter
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=5994
Page 1 of 1

Author:  Steve H [ May 9th, 2017, 11:33 am ]
Post subject:  AKS Suspension gaiter

Hi,
Does anybody have a solution for a suspension gaiter for a AKS 400. As you know the threaded tube that the gaiter goes around on the AK is of a larger diameter than the 2cv. The 2cv ones I have are not flexible enough to stretch around. EACS and Burton don't supply and I have been told there are no suppliers and that a 2cv pattern part from other suppliers may fit may fit. Any thoughts please?

Author:  Geert [ May 9th, 2017, 11:56 am ]
Post subject:  Re: AKS Suspension gaiter

Maybe this can help. :
https://www.franzose.de/en/Citroen-2CV/ ... /ANR12101/
You could look at Le Bon Coin for a decent secondhand pair

Author:  lpgo [ May 9th, 2017, 12:24 pm ]
Post subject:  Re: AKS Suspension gaiter

Take a look at steering rack gaiters (of "normal" cars) I think they will work fine..

Author:  lpgo [ May 9th, 2017, 12:27 pm ]
Post subject:  Re: AKS Suspension gaiter

or maybee the gaiter of an old gearbox (gearstick)

https://www.burton2cvparts.com/stofhoes ... _8034_8035

Author:  Derek [ May 9th, 2017, 5:40 pm ]
Post subject:  Re: AKS Suspension gaiter

Steering rack gaiter for a GS:
http://www.franzoesische-klassiker-shop ... ts/6033-01

Could be cut down if the big end too big.

Author:  Steve H [ May 9th, 2017, 11:51 pm ]
Post subject:  Re: AKS Suspension gaiter

Thanks for the suggestions guys!

Author:  Steve H [ May 21st, 2017, 11:36 am ]
Post subject:  Re: AKS Suspension gaiter

Gaiter from an old gearbox fitted fine. Thanks

Page 1 of 1 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/