View unanswered posts | View active topics It is currently April 20th, 2024, 3:18 am



Reply to topic  [ 11 posts ]  Go to page 1, 2  Next
 Rubber gaiters 
Author Message
Firing on two.

Joined: March 26th, 2010, 8:41 pm
Posts: 234
Post Rubber gaiters
Why is todays rubber rubbish? I bought new drive shafts (SKF manufacture), the gaiters lasted less than 5 years before splitting. Similarly, the boot at the bottom of the steering column - 7 years, the rubber suspension bands in the seats - 7 years. Don't even ask about the gear lever grommets or the gaiter. Even the pedal rubbers perished after about 10,000km.
What's going on ?
BobH (France)


March 17th, 2017, 2:03 pm
Profile
Firing on two.

Joined: June 22nd, 2014, 8:09 pm
Posts: 1180
Location: Reading, Berks UK
Post Re: Rubber gaiters
I read somewhere that they save money by using less actual rubber in the mix. I can't remember what they supposedly put in instead.

You're not wrong, I do a lot of stuff on Mercedes, and MB rubber parts are really expensive. Or you can buy the super cheap aftermarket. Guess which one will last 20 or 30 years as opposed to maybe as little as 6 months!

Such a shame, as all the work that goes into changing some of these parts is wasted and then needs doing again. And some of them fail catastrophically, even writing off the car in one case I know of.

The market seems to have been flooded with extremely bad quality parts.


March 17th, 2017, 8:07 pm
Profile
Firing on two.
User avatar

Joined: October 22nd, 2014, 10:59 pm
Posts: 2007
Location: South-Limburg
Post Re: Rubber gaiters
also the type of rubber should be right for the job it has to do. If you just take the wrong type it might desintegrate sooner...i had a new engine vent rubber that just lasted 3 months...
But i also had parts that were used 50 years and still ok..


March 18th, 2017, 10:36 pm
Profile
Firing on two.

Joined: March 26th, 2010, 8:41 pm
Posts: 234
Post Re: Rubber gaiters
So what can we do, It would seem un-reasonable to expect the supplier to replace these components, but is it unreasonable? The parts have not given an expected life and are "Unfit for purpose"
Next time you buy "rubber parts" Note the date, keep the receipt, then bitch about it if it fails in an unreasonable time. (whatever you are using these rubber parts for !!)
BobH


March 19th, 2017, 10:13 pm
Profile
User avatar

Joined: January 14th, 2010, 10:38 am
Posts: 19
Location: Apeldoorn, Netherlands
Post Re: Rubber gaiters
There are also neoprene gaiters:
Image

_________________
Touareg Trail 2007/2009
www.2cvtransahara.nl


March 21st, 2017, 10:14 am
Profile WWW
Firing on two.

Joined: March 26th, 2010, 8:41 pm
Posts: 234
Post Re: Rubber gaiters
Who sells the neoprene gaiters and do they do all the other ones - like demister vent, gear-lever and handbrake ones. I notice that 2CVclub have changed the design of the floor/steering column gaiter to include a nylon bush for the column to rotate in.
BobH


March 22nd, 2017, 4:48 pm
Profile
User avatar

Joined: January 14th, 2010, 10:38 am
Posts: 19
Location: Apeldoorn, Netherlands
Post Re: Rubber gaiters
https://www.burton2cvparts.com/index.php?main_page=advanced_search_result&search_in_description=1&keyword=Gaiter

_________________
Touareg Trail 2007/2009
www.2cvtransahara.nl


March 22nd, 2017, 7:17 pm
Profile WWW
Firing on two.
User avatar

Joined: March 5th, 2009, 6:23 pm
Posts: 2146
Location: Near Monmouth
Post Re: Rubber gaiters
http://www.ecas2cvparts.co.uk/advanced_ ... er&x=0&y=0


March 22nd, 2017, 8:36 pm
Profile
Firing on two.
User avatar

Joined: October 22nd, 2014, 10:59 pm
Posts: 2007
Location: South-Limburg
Post Re: Rubber gaiters
The original steering column gaiter has a nylon ring in too.


March 27th, 2017, 8:25 am
Profile
Firing on two.

Joined: February 4th, 2009, 2:52 pm
Posts: 268
Post Re: Rubber gaiters
There has been a nylon ring in the column gaiter since at least 1967.

bobh wrote:
Who sells the neoprene gaiters and do they do all the other ones - like demister vent, gear-lever and handbrake ones. I notice that 2CVclub have changed the design of the floor/steering column gaiter to include a nylon bush for the column to rotate in.
BobH


March 28th, 2017, 8:27 am
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 11 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 121 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.