| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| CAMSHAFT IGNITION PINS PROBLEM http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=5913 |
Page 1 of 1 |
| Author: | kitwhite [ November 5th, 2016, 4:46 pm ] |
| Post subject: | CAMSHAFT IGNITION PINS PROBLEM |
One of the pins on the end of the camshaft that holds the springs that control the Advance and Retard of the Points Cam is loose any ideas? |
|
| Author: | ken [ November 5th, 2016, 7:33 pm ] |
| Post subject: | Re: CAMSHAFT IGNITION PINS PROBLEM |
Kit, as posted elsewhere, I've managed to repair these with a dot of weld at either side of the pin. Just make sure that the pin is sitting square to its backplate before pulling the trigger... |
|
| Author: | Taskos [ November 5th, 2016, 8:48 pm ] |
| Post subject: | Re: CAMSHAFT IGNITION PINS PROBLEM |
http://www.ecas2cvparts.co.uk/ignition- ... -1967.html |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|