International2cvFriends.com
http://www.international2cvfriends.com/forum/

Motor and gearbox conversation
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=5793		 Page 1 of 1
Author:  Vasil Ami [ March 30th, 2016, 12:09 am ]
Post subject:  Motor and gearbox conversation
I got a couple of engines and gearbox's that i wanna keap for a longer period of time maybe 10 years.i wass thinking of filling the exhaust and intake holes with new gearbox oil and also the combustion chamber and filling the engine block at the top point of the oil filler unit.
Any one with some experience on this ?
Author:  Bart [ March 31st, 2016, 1:40 pm ]
Post subject:  Re: Motor and gearbox conversation
No, I have no experience with this
Author:  kitwhite [ April 1st, 2016, 2:16 pm ]
Post subject:  Re: Motor and gearbox conversation
I have often spoken to my engine and gearbox but no reply I'm afraid. :lol:
As far as conservation is concerned Oil down the bores cover all openings with oily clothes.
Author:  EirikJ [ April 1st, 2016, 7:59 pm ]
Post subject:  Re: Motor and gearbox conversation
I mostly speak to my car as a whole. But words have been spoken to the engine, at special moments....

There exists "conservation oil" in spray cans. But I have used thin oil of any type, in spray can, to stop steel and aluminium to oxidize during storage. The oil need to be a bit sticky and cling well to the metal. I take out the spark plug and spray in the sylinder, and on the outside wherever I think it is necessary.
Author:  Vasil Ami [ April 2nd, 2016, 9:47 am ]
Post subject:  Re: Motor and gearbox conversation
:D
i just notice it should be the other way around the "conservation " hahahaha
Author:  Vasil Ami [ April 2nd, 2016, 9:50 am ]
Post subject:  Re: Motor and gearbox conversation
Anyway i was thinking of filling every hole with mineral oil
Page 1 of 1 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/