So here I am with more questions for the wise ones
My car has been leaking oil like a sieve, over the winter it got really bad before I noticed and it turned out the oil feed pipe had corroded, so I changed that, had problems with the thread on the crankcase because as per usual I over tightened it.. I rescued that and no leaks there at all, only it still has been leaving puddles everywhere.
Today I popped off the cowling to look, suspecting that actually my head needed re-seating. It turns out not, I re-torqued the head anyway, but the leak is actually coming from the oil sensor switch thingy.
My question is can I just tighten that up? Or is there a seal I can buy - or in fact does it need a new sensor unit with seal attached?
(I do wonder if I need a new breather too, and if that might help. Its not that old but I hear they don't last forever.)
Thanks