| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Clutch plate http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=5291 |
Page 1 of 1 |
| Author: | Matt_S [ June 23rd, 2014, 12:11 pm ] |
| Post subject: | Clutch plate |
Simple question can you put a clutch plate in the wrong way around?? Note (it's for a GS engine not A series) |
|
| Author: | AZS [ June 23rd, 2014, 12:47 pm ] |
| Post subject: | Re: Clutch plate |
Not sure about the gayass but with a 2CV it won't fit. |
|
| Author: | Matt_S [ June 23rd, 2014, 3:35 pm ] |
| Post subject: | Re: Clutch plate |
That's what I thought, u could only put it in one way round, I was hoping that my problem could be as simple as that but doesn't look like it!! |
|
| Author: | Neil [ June 23rd, 2014, 4:06 pm ] |
| Post subject: | Re: Clutch plate |
Worth asking on the G section page on FB? |
|
| Author: | Nelsthebass [ June 23rd, 2014, 7:30 pm ] |
| Post subject: | Re: Clutch plate |
Might be the same issue as a A series one where the splines get lapped over and the bugger won't go on.... |
|
| Author: | Matt_S [ June 24th, 2014, 7:46 am ] |
| Post subject: | Re: Clutch plate |
Neil wrote: Worth asking on the G section page on FB? Cheers Neil, done... |
|
| Author: | Matt_S [ June 24th, 2014, 7:47 am ] |
| Post subject: | Re: Clutch plate |
And I think I've figured it out, looks like I could have an Ami super gearbox and got a GS one hence the problem... |
|
| Author: | Nelsthebass [ June 24th, 2014, 6:33 pm ] |
| Post subject: | Re: Clutch plate |
The engine you got from me was running through an ami super box on Nippy..... |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|