International2cvFriends.com
http://www.international2cvfriends.com/forum/

Front Wheel Bearing
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=5285
Page 1 of 1

Author:  Steve H [ June 19th, 2014, 12:56 pm ]
Post subject:  Front Wheel Bearing

I'm endeavouring to change a front wheel bearing. I've been loaned a Citroen tool for the rear, it looks like it will do the front as well. The Haynes manual doesn't make it that clear but I'm assuming the hub is in 2 parts (dicounting the bearing, ring nut and seals). The part with the three wheel studs and the part which houses the bearing and king pin?
These need to be seperated? How is this done? Currently the hub is off the arm. Can the hub be seperated off the arm or is it easier to reinstall on the arm?
Many thanks in advance for any advice.

Steve

Author:  Steve H [ June 19th, 2014, 12:59 pm ]
Post subject:  Re: Front Wheel Bearing

oops! Posted in the wrong section. Not sure how to rectify this! Sorry!

Author:  Neil [ June 19th, 2014, 4:08 pm ]
Post subject:  Re: Front Wheel Bearing

ta da!

Author:  Sean [ June 20th, 2014, 8:01 am ]
Post subject:  Re: Front Wheel Bearing

have a look through the history section James Wallace did one recently

there is the swivel housing and there is the hub - the disk with the 3 studs. The hub needs to come out 2 tyre levers will do the job or you can drift it out but the risk is high of messing it up.

once thats out then its retaining ring out with all the warnings about that and then the bearing will fall out

Author:  Steve H [ June 20th, 2014, 9:22 am ]
Post subject:  Re: Front Wheel Bearing

Thanks Sean. After reading James' account, I'm really looking forward to the job. (Not! :) )

Author:  Joolz [ June 21st, 2014, 2:27 am ]
Post subject:  Re: Front Wheel Bearing

These things are rarely as difficult as James can make them look, sorry James.

Author:  lpgo [ June 21st, 2014, 8:38 am ]
Post subject:  Re: Front Wheel Bearing

Wheel bearings are as women..... Always asking to much attention.... and they never do want you want them to do.... :lol: :lol: :lol: :lol: :lol:

p.s. Women say the same about men.....

Page 1 of 1 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/